ผลการค้นหา

Binary Alloy

แปลว่า(english) An alloy containing two elements, apart from minor impurities, as brass containing the two elements copper and zinc.

FAST

แปลว่า(Software Engineering) Facilitated application specification techniques, a structured meeting between developer and customer; intent is to define basic requirementsFormal methods

Boiler

แปลว่า(english) A closed vessel in which water, is transformed into steam at a given pressure and temperature under controlled conditions.

Configuration

แปลว่า(Software Engineering) the collection of programs, documents and data that must be controlled when changes are to be madeConfiguration audit

Brite

แปลว่า(english) 1) Regular galvanize coating (not minimized spangle or JP). 2) Rolls that have no grit; smooth finish on surface of steel.

BREATHER

แปลว่า(english) A device which permits air to move in and out of a container or component to maintain atmospheric pressure.

Customer

แปลว่า(Software Engineering) the person or group that has requested the software and will be paying the bill for its development

Acme Thread

แปลว่า(english) A screw thread having a 29 degree included angel. Used largely for feed and adjusting screws on machine tools.

Brazing

แปลว่า(english) Joining metals by fusion of nonferrous alloys that have melting points above 800 F (425C), but lower than those of the metals being joined. May be accomplished by a torch. Filler metal is ordinarily in rod form in torch brazing; whereas in furnace and dip brazing the work material is first assembled and the filler metal may then be applied as wire, washers, clips, bands, or may be bonded, as in brazing sheet.

Zirconia

แปลว่า(english) ZrO2 an acid refractory up to 2500 B0C (4532 B0F) having good thermal shock resistance and low electrical resistively.

Change control

แปลว่า(Software Engineering) an umbrella process that enables a project team to accept, evaluate, and act on changes in a systematic manner

Secondary treatment

แปลว่า(Environmental Engineering) In wastewater treatment, the conversion of the suspended, colloidal and dissolved organics remaining after primary treatment into a microbial mass with is then removed in a second sedimentation process. Secondary treatment included both the biological process and the associated sedimentation process.