ผลการค้นหา

Magnetite

แปลว่า(Concrete Engineering) An aggregate used in heavy weight concrete, consisting primarily of ferrous metaferrite (Fe304). A black magnetic iron ore with a specific gravity of approximately 5.2 and a Mohs hardness of about 6.

Acid Steel

แปลว่า(english) Steel melted in a furnace with an acid bottom and lining and under a slag containing an excess of an acid substance such as silica.

Box Annealing

แปลว่า(english) Annealing a metal or alloy in a sealed container under conditions that minimize oxidation. In box annealing a ferrous alloy, the charge is usually heated slowly to a temperature below the transformation range, but sometimes above or within it, and is then cooled slowly; this process is also called close annealing or pot annealing.

Cause-effect graphing

แปลว่า(Software Engineering) a black-box testing method

Joint application development (JAD)

แปลว่า(Software Engineering) a specific FAST technique

Equivalence partitioning

แปลว่า(Software Engineering) a black-box testing method

Funicular:

แปลว่า(english) A funicular shape is one similar to that taken by a suspended chain or string subjected to a particular loading.

Clarifier (sedimentation basin)

แปลว่า(Environmental Engineering) A tank in which quiescent settling occurs, allowing solid particles suspended in the water to agglomerate and settle to the bottom of the tank. The solids resulting from the settling being removed as a sludge.

Compression settling

แปลว่า(Environmental Engineering) Settling which occurs in the lower reaches of clarifiers where particle concentrations are highest. Particles can settle only by compressing the mass of particles below.

Aecm, Ae1, and Ae3

แปลว่า(english) Equilibrium transformation temperatures in steel.

Cell

แปลว่า(Environmental Engineering) A unit of varying dimensions in a landfill which is isolated from the environment by 6 to 12 inches of soil cover. A cell is one day's waste or less. A cell is covered with soil at the end of each day.

Flexural Strength

แปลว่า(Concrete Engineering) A property of a solid that indicates its ability to withstand bending.