ค้นเจอ 126 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "iron out"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Acid-Brittleness

(english) Brittleness resulting from pickling steel in acid; hydrogen, formed by the interaction between iron and acid, is partially absorbed by the metal, causing acid brittleness.

Bright Annealing

(english) A process carried out usually in a controlled furnace atmosphere, so surface does not oxidize, remaining bright.

Bessemer Process

(english) A process for making steel by blowing air through molten pig iron contained in a refractory lined vessel so that the impurities are thus removed by oxidation.

BREATHER

(english) A device which permits air to move in and out of a container or component to maintain atmospheric pressure.

clamp

ปากกาสำหรับหนีบหรือจัดวัตถุ, แม่แรงอัด, วัดได้ด้วยปากกา C-clamp (ปากกาอัดรูปตัว C ประกับรูปตัว C ) iron T-bar clamp (แม่แรงอัดพื้นไม้) steel sash clamp (แม่แรงอัดพื้นไม้)

Basic Oxygen Process

(english) (BOP) A process in which molten steel is produced in a furnace by blowing oxygen into molten iron, scrap and flux materials. The furnace is known as Basic Oxygen Furnace (BOF).

Ball Piston Pumps

(english) The Ball Piston Pump is a very simple pump design. It has a rotor which revolves around an internal stator. The rotor has twelve cylinders machined out of it, and each cylinder has a ball inside which can slide in and out of the cylinder.

Magnetite

(Concrete Engineering) An aggregate used in heavy weight concrete, consisting primarily of ferrous metaferrite (Fe304). A black magnetic iron ore with a specific gravity of approximately 5.2 and a Mohs hardness of about 6.

Bending Angle

(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

Broaching

(english) Smoothing machined holes or outside surfaces of castings by drawing pushing on or more broaches (special cutting tools) through the roughed out hole.

Acid Process 1

(english) A process of making steel, either Bessemer, open-hearth or electric, in which the furnace is lined with a siliceous refractory and for which low phosphorus pig iron is required as this element is not removed.

Acid-Process

(english) A process of making steel, either Bessemer, open-hearth or electric, in which the furnace is lined with a siliceous refractory and for which low phosphorus pig iron is required as this element is not removed.


 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z