ตัวกรองผลการค้นหา
square dip net
แปลว่ายอ
square up to
แปลว่าเตรียมต่อสู้กับ
Back To Square One
unit of area equal to 1,600 square metres
แปลว่าไร่
square case with several drawers (used for laying areca-nut, betel leaves, tobacco etc.)
แปลว่ากลี่
ABSOLUTE PRESSURE
แปลว่า(english) The indicated value of the weight of the earth's atmosphere. At sea level, this value is approximately 14.65 psi (pounds per square inch).
stoplogs
แปลว่าท่อนกั้นน้ำ : ท่อนไม้ แท่งคอนกรีต หรือเหล็ก สำหรับใส่ในร่อง groove เพื่อปิดกั้นน้ำชั่วคราวเมื่อต้องการตรวจสอบหรือซ่อมแซมบานบังคับน้ำ ในกรณีที่ท่อนกั้นน้ำถูกใช้เพื่อควบคุมการไหลของน้ำผ่านอาคารจะเรียกว่า regulation planks
Blaine Fineness
แปลว่า(Concrete Engineering) The fineness of granular materials such as cement and pozzolan, expressed as total surface area in square centimeters per gram, determined by the Blaine air-permeability apparatus and procedure.
Shear strain:
แปลว่า(english) Strain measuring the intensity of racking in the material. Shear strain is measured as the change in angle of the corners of a small square of material.
Base Box
แปลว่า(english) Unit of area of 112 sheets of tin mil products (tin plate, tin free steel or black plate) 14 by 20 inches, or 31,360 square inches. Tin Plate is sold, and carried in finished inventory, on a weight per unit area rather than on a thickness basis.
Billet 2
แปลว่า(english) A solid semi-finished round or square product that has been hot worked by forging, rolling, or extrusion. An iron or steel billet has a minimum width or thickness of 1 1/2 in. and the cross-sectional area varies from 2 1/4 to 36 sq. in. For nonferrous metals, it may also be a casting suitable for finished or semi-finished rolling or for extrusion.
Billet
แปลว่า(english) (1) A semi-finished section hot rolled from a metal ingot, with a rectangular cross section usually ranging from 16 to 36 in., the width being less than twice the thickness. Where the cross section exceeds 36 in., the term “bloom” is properly but not universally used. Sizes smaller than 16 in. are usually termed “bars”; a solid semi-finished round or square product which has been hot worked by forging, rolling, or extrusion. (2) A semi-finished, cogged, hot rolled or continuous-cast metal product of uniform section, usually rectangular with radiused corners. Billets are relatively larger than bars.