ตัวกรองผลการค้นหา
Brake Press Bending
แปลว่า(english) An operation which produces various degree bends when fabricating parts from steel.
Displacement:
แปลว่า(english) A change in position. A displacement may be a translation a rotation or a combination of those.
Modulus of elasticity:
แปลว่า(english) The proportional constant between stress and strain for material with linear elastic behavior: calculated as stress divided by strain. Modulus of elasticity can be interpreted as the slope of the stress-strain graph. It is usually denoted as E, sometimes known as Young's Modulus Y, or E-Modulus.
Blister
แปลว่า(english) 1) Coating defect consisting of the formation of bubbles in a coating, which appear as hemispherical elevations. The blisters are hollow, and are usually caused by entrapped air or solvent. 2) A raised spot on the surface on the surface of metal due to expansion of gas which causes a subsurface metal separation such as inclusions and small laminations.
Brittle Inter-metallic Layer
แปลว่า(english) An iron-zinc alloy layer formed between the steel substrate and the free zinc of galvanized coatings.
Brale
แปลว่า(english) A diamond penetrator, conical in shape, used with a Rockwell hardness tester for hard metals.
Surface force:
แปลว่า(english) A force applied to the surface of an object.
Bright Dipping
แปลว่า(english) Chemical polishing of aluminum, often by treatment with a mixture of nitric acid and phosphoric acid, yielding a mirror-shiny (specular) highly reflective surface. It is almost always followed by anodizing to protect the surface and provide some choice of color.
By-Pass
แปลว่า(english) Manual control used to by-pass automatic valve if it fails or in an emergency.
Acid Embrittlement
แปลว่า(English) Embrittlement during pickling due to absorption of hydrogen.
BALL VALVE
แปลว่า(english) A valve that may be used to divert the flow of fluid in a passage. Most normally configured in a two-way pattern that is either open or closed.
Adapters
แปลว่า(english) Steel segments that are bolted to the reel mandrel to increase their diameter so that large (24" ID) coils can be run.