ค้นเจอ 1,993 รายการ

 หรือคุณกำลังค้นหา withe, Task analysis, Bonderizing, Effort, Connection:, Amino acid, Burnishing

withheld

แปลว่ากริยาช่องที่ 2 ของ withhold, ระงับ

VT

withdrawn

แปลว่ากริยาช่องที่ 3 ของ withdraw

VT

withdrew

แปลว่ากริยาช่องที่ 2 ของ withdraw

VT

withstood

แปลว่ากริยาช่องที่ 2 และ 3 ของ withstand, อดทนต่อ, อดกลั้นต่อ, ต้านทานต่อ

VT

handle with care

แปลว่าโปรดระวังในการจับต้อง (มักใช้กับของที่แตกหรือเปราะง่าย เช่น เครื่องแก้ว)

Boron (chemical symbol B)

แปลว่า(english) Element N. 5 of the periodic system. Atomic weight 10.82. It is gray in color, ignites at about 1112 (degrees) F. and burns with a brilliant green flame, but its melting point in a non-oxidizing atmosphere is about 4000 (degrees) F. Boron is used in steel in minute quantities for one purpose only- to increase the hardenability as in case hardening and to increase strength and hardness penetration.

Blow Back

แปลว่า(english) A coating defect consisting of a lower coating film weight on the bottom of the coated sheet caused by high velocity air in the oven. Blow back usually occurs with high solids coatings which have little solvent to evaporate and "set" the film.

Bearing Load

แปลว่า(english) A compressive load supported by a member, usually a tube or collar, along a line where contact is made with a pin, rivet, axle, or shaft.

Sulfate Resistance

แปลว่า(Concrete Engineering) Ability of cement paste, aggregate, or mixtures thereof to withstand sulfate attack.

Acid Steel

แปลว่า(english) Steel melted in a furnace with an acid bottom and lining and under a slag containing an excess of an acid substance such as silica.

Billet

แปลว่า(english) (1) A semi-finished section hot rolled from a metal ingot, with a rectangular cross section usually ranging from 16 to 36 in., the width being less than twice the thickness. Where the cross section exceeds 36 in., the term “bloom” is properly but not universally used. Sizes smaller than 16 in. are usually termed “bars”; a solid semi-finished round or square product which has been hot worked by forging, rolling, or extrusion. (2) A semi-finished, cogged, hot rolled or continuous-cast metal product of uniform section, usually rectangular with radiused corners. Billets are relatively larger than bars.

Acceleration:

แปลว่า(english) A vector quantity equal to the rate that velocity changes with time.