ผลการค้นหา

Bridle Rolls

แปลว่า(english) A series of neoprene or steel rolls.

Bottom Roll

แปลว่า(english) Submerged roll in the pot used to keep the strip submerged in the pot.

rock'n'roll

แปลว่าคำย่อของ rock and roll

Belly Roll

แปลว่า(english) Roll used on the line to steady plate.

steam-roller

แปลว่ารถบดถนน ที่ใช้เครื่องจักรไอน้ำ อย่างสมัยก่อน (ปัจจุบันนิยมใช้เครื่องดีเซลเรียกว่า Diesel roller)

Roller support:

แปลว่า(english) In two dimensions, a roller support restrains one translation degree of freedom.

Back-up Roll

แปลว่า(english) 1) Roll used as a support roll mainly for plater rolls. 2) Two rolls, one on top and one on bottom of the two work rolls which apply pressure and reduce the flexing of the work rolls.

Bruise

แปลว่า(english) A mark transferred to the strip surface from a defective process roll. Similar to dent or punchmark.

Batch Anneal

แปลว่า(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.

Bridle Snubber

แปลว่า(english) The roll above the bridle rolls used to thread the strip. Also is used to steer the strip through the bridle.

Billet

แปลว่า(english) (1) A semi-finished section hot rolled from a metal ingot, with a rectangular cross section usually ranging from 16 to 36 in., the width being less than twice the thickness. Where the cross section exceeds 36 in., the term “bloom” is properly but not universally used. Sizes smaller than 16 in. are usually termed “bars”; a solid semi-finished round or square product which has been hot worked by forging, rolling, or extrusion. (2) A semi-finished, cogged, hot rolled or continuous-cast metal product of uniform section, usually rectangular with radiused corners. Billets are relatively larger than bars.

cold rolled steel

แปลว่าเหล็กรีดเย็น