ผลการค้นหา

Batch Anneal

แปลว่า(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.

Acid Steel

แปลว่า(english) Steel melted in a furnace with an acid bottom and lining and under a slag containing an excess of an acid substance such as silica.

Ultimate biochemical oxygen demand (BODu)

แปลว่า(Environmental Engineering) The total amount of oxygen required to oxidize any organic matter present in a water, i.e. after an extended period, such as 20 or 30 days.

Pining

แปลว่า(Concrete Engineering) Development of relatively small cavities in a concrete surface, due to phenomena such as cavitation or corrosion.

Black Oil Tempered Spring Steel Strip (Scaleless Blue)

แปลว่า(english) A flat cold rolled usually .70/.80 medium high carbon steel strip, blue-black in color, which has been quenched in oil and drawn to desired hardness. While it looks and acts much like blue tempered spring steel and carries a Rockwell hardness of C44/47, it has not been polished and is lower in carbon content. Used for less exacting requirements than clock spring steel, such as snaps, lock springs, hold down springs, trap springs, etc. It will take a more severe bend before fracture than will clock spring, but it does not have the same degree of spring-back.

such as

แปลว่าเช่น

Autotrophs

แปลว่า(Environmental Engineering) A group of organisms capable of obtaining carbon for synthesis from inorganic carbon sources such as carbon dioxide and its dissolved species (the carbonates). This group includes plants and algae.

Tilt-up

แปลว่า(Concrete Engineering) A method of concrete construction such as where members are cast horizontally near their eventual position, usually on a recently placed slab, and then tilted into place after removal of forms.

Blaine Fineness

แปลว่า(Concrete Engineering) The fineness of granular materials such as cement and pozzolan, expressed as total surface area in square centimeters per gram, determined by the Blaine air-permeability apparatus and procedure.

Basic Steel

แปลว่า(english) Steel melted in a furnace with a basic bottom and lining and under a slag containing an excess of a basic substance such as magnesia or lime.

Wagner Fineness

แปลว่า(Concrete Engineering) The fineness of materials such as portland cement expressed as total surface area in centimeters per gram as determined by the Wagner turbidimeter apparatus and procedure.

Blister

แปลว่า(english) 1) Coating defect consisting of the formation of bubbles in a coating, which appear as hemispherical elevations. The blisters are hollow, and are usually caused by entrapped air or solvent. 2) A raised spot on the surface on the surface of metal due to expansion of gas which causes a subsurface metal separation such as inclusions and small laminations.