ผลการค้นหา

have periodic flow of accumulated blood

แปลว่าตกหมก

speed

ความหมายคล้ายกันกับhaste,hurry,hustle,momentum,pace,quick,rapid,rate,swiftness,tempo,velocity

velocity, critical

แปลว่าความเร็ววิกฤต : ความเร็วของกระแสน้ำเมื่อการไหลเริ่มเปลี่ยนจากการไหลแบบราบเรียบ(laminar flow) ไปเป็นการไหลแบบปั่นป่วน (turbulent flow) หรือ คือความเร็วของกระแสน้ำซึ่งมี Froude number เท่ากับ 1

discharge(1)

แปลว่าอัตราการไหลของน้ำ : ปริมาณน้ำที่ไหลผ่านพื้นที่หน้าตัดหนึ่งที่กำหนดของทางน้ำในหนึ่ง หน่วยเวลา เรียกอีกอย่างหนึ่งว่า rate of flow

Backward Extrusion

แปลว่า(english) Forcing metal to flow in a direction opposite to the motion of a punch or die.

Shock load

แปลว่า(Environmental Engineering) Influent wastewater entering the plant which has an unusually high organic content and/or high flow rate.

Basis path testing

แปลว่า(Software Engineering) a white box test case design technique that used the algorithmic flow of the program to design tests

Structured programming

แปลว่า(Software Engineering) a design method that limited design constructs to only three basic forms and constrains program flow for better quality

Consistency

แปลว่า(Concrete Engineering) The degree of plasticity of fresh concrete or mortar The normal measure of consistency is slump for concrete and flow for mortar.

BALL VALVE

แปลว่า(english) A valve that may be used to divert the flow of fluid in a passage. Most normally configured in a two-way pattern that is either open or closed.

Age Hardening

แปลว่า(english) Hardening by aging, usually after rapid cooling or cold working. The term as applied to soft, or low carbon steels, relates to a wide variety of commercially important, slow, gradual changes that take place in properties of steels after the final treatment. These changes, which bring about a condition of increased hardness, elastic limit, and tensile strength with a consequent loss in ductility, occur during the period in which the steel is at normal temperatures.

Bend Test

แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.