ผลการค้นหา

Blasting (Blast Cleaning)

แปลว่า(english) A process for cleaning or finishing metal objects by use of an air blast or centrifugal wheel that throws abrasive particles against the surface of the work pieces. Small, irregular particles of steel or iron are used as the abrasive in grit blasting, and steel or iron balls in shot blasting.

Basis set

แปลว่า(Software Engineering) the set of tests derived using basis path testingBehavioral modeling

Basic Oxygen Process

แปลว่า(english) (BOP) A process in which molten steel is produced in a furnace by blowing oxygen into molten iron, scrap and flux materials. The furnace is known as Basic Oxygen Furnace (BOF).

mastoiditis

แปลว่าอาการอักเสบของบริเวณ mastoid

Reactive waste

แปลว่า(Environmental Engineering) A waste which; 1) reacts violently with water, 2) forms potentially explosive mixtures with water, 3) is normally unstable, 4) contains cyanide or sulfide in sufficient quantity to evolve toxic fumes at high or low pH, 5) is capable of exploding if heated under pressure, or 6) is an explosive compound listed in Department of Transportation (DoT) regulations. One of EPA's four hazardous waste properties.

Corrosive waste

แปลว่า(Environmental Engineering) A waste that is outside the pH range of 2 to 12.5 or a waste that corrodes steel at a rate greater than 6.35 mm (0.25 in) per year. One of EPA's four hazardous waste properties.

Clarifier (sedimentation basin)

แปลว่า(Environmental Engineering) A tank in which quiescent settling occurs, allowing solid particles suspended in the water to agglomerate and settle to the bottom of the tank. The solids resulting from the settling being removed as a sludge.

Adapti Investment Casting Process

แปลว่า(english) A lost wax process employing one of three methods; centrifugal, vacuum or gravity-pouring casting.

Oriental alabaster

แปลว่า(แร่) หินปูนลักษณัเหมือนแร่ gyhsum [CaSO1.2H3O] เป็นหินปูนอ่อน ปั้นหรือสลักลวดลายได้ง่าย ใช้ทำเครื่องประดับตกแต่ง เช่น แจกัน ฯลฯ มีมากในแอลจีเรีย, อียิปต์และอื่น ๆ

Precast

แปลว่า(Concrete Engineering) A concrete unit, structure or member that is cast and cured in an area other than its final position or place.

Sand (ASTM C125)

แปลว่า(Concrete Engineering) That portion of an aggregate passing the No. 4 (4.76 mm) sieve and predominantly retained on the No. 200 (74 micron) sieve.

Basic Oxygen Furnace (BOF)

แปลว่า(english) "WHAT A pear-shaped furnace, lined with refractory bricks, that refines molten iron from the blast furnace and scrap into steel. Up to 30% of the charge into the BOF can be scrap, with hot metal accounting for the rest. WHY BOFs, which can refine a heat (batch) of steel in less than 45 minutes, replaced open-hearth furnaces in the 1950s; the latter required five to six hours to process the metal. The BOF's rapid operation, lower cost and ease of control give it a distinct advantage over previous methods. HOW Scrap is dumped into the furnace vessel, followed by the hot metal from the blast furnace. A lance is lowered from above, through which blows a high-pressure stream of oxygen to cause chemical reactions that separate impurities as fumes or slag. Once refined, the liquid steel and slag are poured into separate containers. "