ตัวกรองผลการค้นหา
Bench-Blower
แปลว่า(english) A small core-blowing machine, utilizing a removable sand magazine and blow heat.
Bar, Flask
แปลว่า(english) A rib in the cope of a tight flask to help support the sand.
Burn-On-Sand
แปลว่า(english) Sand adhering to the surface of the casting that is extremely difficult to remove.
Blackening Scab
แปลว่า(english) A form of casting defect related to an improper coating rather than to the sand.
Rebound
แปลว่า(Concrete Engineering) Wet shotcrete or sand and cement which bounces away from a surface again at which pneumatically applied mortar is being projected.
Band, Inside
แปลว่า(english) A loose steel frame placed inside a removable flask to reinforce the sand at the parting line after the flask has been removed.
Baked Strength
แปลว่า(english) Compressive, shear, tensile or transverse strength of a mold sand mixture when baked at a temperature above 231 B0F (111 B0C) and then cooled to room temperature.
เครื่องอังทราย
หมายถึง(วิทยา) น. อุปกรณ์ชนิดหนึ่ง ประกอบด้วยถาดบรรจุทราย ใช้สำหรับส่งถ่ายความร้อนให้แก่สิ่งใดสิ่งหนึ่ง โดยวิธีตั้งสิ่งนั้นบนถาดทราย แล้วเผาก้นถาดให้ร้อนจัด. (อ. sand bath).
soil separates
แปลว่าอนุภาคดินแบ่งตามขนาด : อนุภาคของดินที่พิจารณาตามขนาดของมัน แบ่งออกเป็น 3 ชนิด คือ ทราย (sand) ตะกอนดิน (silt) และดินเหนียว (clay) ซึ่งจะมีขนาดตั้งแต่ 2.00 ถึง 0.02 มม. ,0.02 ถึง 0.002 มม. และ 0.002 มม. ลงไป ตามลำดับ
Burning
แปลว่า(english) (1) Permanently damaging a metal or alloy by heating to cause either incipient melting or intergranular oxidation. (2) In grinding getting the work hot enough to cause discoloration or to change the microstructure by tempering or hardening.
Sacking
แปลว่า(Concrete Engineering) Removing or alleviating defects on a concrete surface by applying a mixture of sand and cement to the moistened surface and rubbing with a coarse material such as burlap.
Blast Cleaning (blasting)
แปลว่า(english) A process for cleaning or finishing metal objects by use of an air jet or centrifugal wheel that propels abrasive particles (grit, sand, or shot) against the surfaces of the workpiece at high velocity.