ผลการค้นหา

Bridle Snubber

แปลว่า(english) The roll above the bridle rolls used to thread the strip. Also is used to steer the strip through the bridle.

Black Oil Tempered Spring Steel Strip (Scaleless Blue)

แปลว่า(english) A flat cold rolled usually .70/.80 medium high carbon steel strip, blue-black in color, which has been quenched in oil and drawn to desired hardness. While it looks and acts much like blue tempered spring steel and carries a Rockwell hardness of C44/47, it has not been polished and is lower in carbon content. Used for less exacting requirements than clock spring steel, such as snaps, lock springs, hold down springs, trap springs, etc. It will take a more severe bend before fracture than will clock spring, but it does not have the same degree of spring-back.

Bare Spot

แปลว่า(english) A location on the strip where coating did not adhere.

Burr Mashers

แปลว่า(english) Devices used to remove build up on edge of strip after the slitting process.

Bottom Roll

แปลว่า(english) Submerged roll in the pot used to keep the strip submerged in the pot.

Band Wareroom

แปลว่า(english) A storage area in Strip Steel used for storing hot bands (coil made from slab).

Bridle

แปลว่า(english) A set of rolls used to maintain tension on the strip as it goes through the line.

Bruise

แปลว่า(english) A mark transferred to the strip surface from a defective process roll. Similar to dent or punchmark.

Black Annealing

แปลว่า(english) A process of box annealing or pot annealing ferrous alloy sheet, strip or wire after hot working and pickling.

Bazooka

แปลว่า(english) Performs functions of Galvanneal Furnace; set of torches on wheels used to shoot flames onto a strip to further heat it.

Bending Angle

แปลว่า(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

Butcher Saw Steel

แปลว่า(english) A hardened, tempered, and polished high carbon spring steel strip material (carbon content is generally higher than that of a material used for wood band saw applications) with a Rockwell value of roughly C47/49.