ตัวกรองผลการค้นหา
Dematerialise
กริยาช่อง 2Dematerialised
กริยาช่อง 3Dematerialised
แปลว่าสลายตัว, กลายเป็นอนุภาค, หายไปจากสภาพทางกายภาพ
Dematerialize
กริยาช่อง 2Dematerialized
กริยาช่อง 3Dematerialized
แปลว่าสลายตัว, หายไป, ปรากฏเป็นไอ
Immaterialize
กริยาช่อง 2Immaterialized
กริยาช่อง 3Immaterialized
แปลว่าทำให้เป็นนามธรรม, ทำให้หายไป, ทำให้ไร้รูปร่าง
Materialize
กริยาช่อง 2Materialized
กริยาช่อง 3Materialized
แปลว่าปรากฏขึ้น, เกิดขึ้นจริง, เป็นรูปเป็นร่าง
Z-Mill
แปลว่า(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.
raw material
แปลว่าวัตถุดิบ
Resources
แปลว่า(Software Engineering) anything that is required to get the project done, people, hardware, materials, information, etc.
Basic Oxygen Process
แปลว่า(english) (BOP) A process in which molten steel is produced in a furnace by blowing oxygen into molten iron, scrap and flux materials. The furnace is known as Basic Oxygen Furnace (BOF).
Brinell Hardness Test
แปลว่า(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.
Absorbed Moisture
แปลว่า(Concrete Engineering) Moisture which is mechanically held in a material. In aggregates, that water which is not available to become part of the mixing water is designated "absorbed" water.
Bend Test
แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.
Adsorption
แปลว่า(Environmental Engineering) A surface phenomena in which a solute (soluble material) concentrates or collects at a surface (the adsorbent).