ผลการค้นหา

คำศัพท์/สำนวน บทความ  หาอะไรก็เจอ!
ค้นเจอ 45 รายการ

Rebound

แปลว่า(Concrete Engineering) Wet shotcrete or sand and cement which bounces away from a surface again at which pneumatically applied mortar is being projected.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Abrasive Wear

แปลว่า(english) The displacement and / or detachment of metallic particles from a surface as a consequence of being exposed to flowing fluids or gases.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Billet

แปลว่า(english) (1) A semi-finished section hot rolled from a metal ingot, with a rectangular cross section usually ranging from 16 to 36 in., the width being less than twice the thickness. Where the cross section exceeds 36 in., the term “bloom” is properly but not universally used. Sizes smaller than 16 in. are usually termed “bars”; a solid semi-finished round or square product which has been hot worked by forging, rolling, or extrusion. (2) A semi-finished, cogged, hot rolled or continuous-cast metal product of uniform section, usually rectangular with radiused corners. Billets are relatively larger than bars.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Blue Brittleness

แปลว่า(english) Brittleness exhibited by some steels after being heated to some temperature within the range of 300 (degrees) to 650 (degrees) F, and more especially if the steel is worked at the elevated temperature. Killed steels are virtually free of this kind of brittleness.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Effluent based standards

แปลว่า(Environmental Engineering) Standards which set concentration or mass per time limits on the effluent being discharged to a receiving water.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Brazing

แปลว่า(english) Joining metals by fusion of nonferrous alloys that have melting points above 800 F (425C), but lower than those of the metals being joined. May be accomplished by a torch. Filler metal is ordinarily in rod form in torch brazing; whereas in furnace and dip brazing the work material is first assembled and the filler metal may then be applied as wire, washers, clips, bands, or may be bonded, as in brazing sheet.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Clarifier (sedimentation basin)

แปลว่า(Environmental Engineering) A tank in which quiescent settling occurs, allowing solid particles suspended in the water to agglomerate and settle to the bottom of the tank. The solids resulting from the settling being removed as a sludge.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Being

กริยาช่อง 2คำว่า Being ไม่ใช่คำกริยา คำกริยาคือ Be
 กริยา 3 ช่อง

Protest Too Much
 Idioms