ผลการค้นหา

Burnishing 2

แปลว่า(english) Smoothing surfaces through friction between the material and material such as hardened metal media.

Boron (chemical symbol B)

แปลว่า(english) Element N. 5 of the periodic system. Atomic weight 10.82. It is gray in color, ignites at about 1112 (degrees) F. and burns with a brilliant green flame, but its melting point in a non-oxidizing atmosphere is about 4000 (degrees) F. Boron is used in steel in minute quantities for one purpose only- to increase the hardenability as in case hardening and to increase strength and hardness penetration.

Neat Cement-Paste

แปลว่า(Concrete Engineering) A mixture of water and hydraulic cement, both before and after setting and hardening.

Agglomerating Processes

แปลว่า(english) "Fine particles of limestone (flux) and iron ore are difficult to handle and transport because of dusting and decomposition, so the powdery material usually is processed into larger pieces. The raw material's properties determine the technique that is used by mills. 1) SINTER Baked particles that stick together in roughly one-inch chunks. Normally used for iron ore dust collected from the blast furnaces. 2) PELLETS Iron ore or limestone particles are rolled into little balls in a balling drum and hardened by heat. 3) BRIQUETTES Small lumps are formed by pressing material together. Hot Iron Briquetting (HBI) is a concentrated iron ore substitute for scrap for use in electric furnaces.

Cure

แปลว่า(Concrete Engineering) Method of maintaining sufficient internal humidity and proper temperature for freshly placed concrete to assure proper hydration of the cement, and proper hardening of the concrete.

Brinell Hardness Testing

แปลว่า(english) Method of determining the hardness of materials; involves impressing a hardened ball of specified diameter into the material surface at a known pressure (10-mm ball, 500-kg load for aluminum alloys). The Brinell hardness number results from calculations involving the load and the spherical area of the ball impression. Direct-reading testing are generally used for routine inspection of forgings, and as a heat treat control function.

oil hardening

แปลว่า(กลไก) การชุบเหล็กให้แข็ง ด้วยการชุบน้ำมัน, การชุบจะดำเนินเมื่อเหล็กถูกเผาจนร้อนจัดแล้วจึงแช่ลงไปในน้ำมัน แล้วปล่อยทิ้งไว้ให้เหล็กค่อย ๆ เย็นลงการกระทำโดยวิธีนี้จะทำให้เหล็กแข็งและไม่เปราะ

Bake

แปลว่า(english) Heat in an oven to a low controlled temperature to remove gases or to harden a binder.

Adiabatic Curing

แปลว่า(Concrete Engineering) The maintenance of ambient conditions during the setting and hardening of concrete so that heat is neither lost nor gained from the surroundings of the concrete.

Rock Pocket

แปลว่า(Concrete Engineering) Area or portion of hardened concrete which is deficient in mortar and consisting primarily of coarse aggregate and open voids; caused by insufficient consolidation or separation during placement, or both; by leakage from form.

self-hardening steel

แปลว่า(โลหะ) เหล็กกล้าที่แข็งในตัวเอง เช่น เหล็กกล้าที่ทำเครื่องมือ เป็นเหล็กแข็งเมื่อปล่อยให้เย็นลงตามธรรมดา

hardened steel roller

แปลว่าขดเหล็กรูปทรงกระบอกของแหนบรองรับน้ำหนักรถ