ตัวกรองผลการค้นหา
Effluent based standards
แปลว่า(Environmental Engineering) Standards which set concentration or mass per time limits on the effluent being discharged to a receiving water.
Blush
แปลว่า(english) A coating defect consisting of the whitening of a cured film which results in a translucent or opaque appearance with accompanying loss of gloss. Blushing usually occurs during the pasteurization or steam processing of films which are undercured or water sensitive.
Absorbed Moisture
แปลว่า(Concrete Engineering) Moisture which is mechanically held in a material. In aggregates, that water which is not available to become part of the mixing water is designated "absorbed" water.
Bend Test
แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.
Thermocline
แปลว่า(Environmental Engineering) The depth at which an inflection point occurs in a lake temperature profile.
Bolster (die block)
แปลว่า(english) A “tool” or reinforcing part which supports the backer-which, in turn, supports an extruding die against the pressure of extrusion.
Global warming
แปลว่า(Environmental Engineering) The long-term warming of the plant due to increases in greenhouse gases which trap reflected light preventing it from exiting to space.
Maintainability
แปลว่า(Software Engineering) the degree to which a program is amenable to change
Plastic Consistency
แปลว่า(Concrete Engineering) Condition in which concrete, mortar, or cement paste will sustain deformation continuously in any direction without rupture.
Burnt
แปลว่า(english) A definition applying to material which has been permanently damaged by over-heating.
Ductility:
แปลว่า(english) Ductility generally refers to the amount of inelastic deformation which a material or structure experiences before complete failure. Quantitatively, ductility can be defined as the ratio of the total displacement or strain at failure, divided by the displacement or strain at the elastic limit.
Peeling
แปลว่า(Concrete Engineering) A process in which thin flakes of matrix or mortar are broken away from concrete surface; caused by adherence of surface mortar-to forms as forms are removed, or to trowel or float in portland cement plaster.