ผลการค้นหา

คำศัพท์/สำนวน บทความ  หาอะไรก็เจอ!

คำศัพท์ที่เกี่ยวข้องกับ "*placement*"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

ค้นเจอ 32 รายการ

placement

สถานที่, ตำบล, สภาพ, ฐานะ, การวาง, ที่ตั้ง
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Landfilling

(Environmental Engineering) The placement of wastes into the land under controlled conditions to minimize their migration or effect on the surrounding environment.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

replacement part

เครื่องอะไหล่เครื่องยนต์หรือเครื่องจักร
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Ductility:

(english) Ductility generally refers to the amount of inelastic deformation which a material or structure experiences before complete failure. Quantitatively, ductility can be defined as the ratio of the total displacement or strain at failure, divided by the displacement or strain at the elastic limit.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Deflection:

(english) This word usually carries the same meaning as displacement, although it is sometimes used in place of deformation.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Abrasive Wear

(english) The displacement and / or detachment of metallic particles from a surface as a consequence of being exposed to flowing fluids or gases.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Degree of Freedom:

(english) A displacement quantity which defines the shape and location of an object. In the two dimensional plane, a rigid object has three degrees of freedom: two translations and one rotation. In three dimensional space, a rigid object has six degrees of freedom (three translations and three rotations).
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Stiffness:

(english) This is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness means that a large force produces a small displacement. When discussing the stiffness of a material, the concept is the same, except that stress substitutes for force, and strain substitutes for displacement; see modulus of elasticity.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

AAC - Autoclaved Aerated Concrete

(Concrete Engineering) Exceptionally lightweight precast concrete with high thermal qualities and fire resistence. Suitable for cutting with ordinary hand tools. Mix design is composed of portland cement, sand or siliceous material, lime, gypsum, finely powdered aluminum, and water. Initial mix is a combination of portland cement, sand, lime and gypsum to produce a slurry. Finely powdered aluminum mixed into a paste is added prior to placement into large, rail-like forms. The finely powdered aluminum reacts with the alkaline components of the cement and lime to produce hydrogen gas, which increases the volume approximately five times producing a uniformly, dispersed cellular structure. Units are cut to required shape. Units are placed in an autoclave, an enclosed pressurized chamber, and steam cured at 3500 F. Approximately 80% of the ultimate volume consists of air voids.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

virtual displacement

การเปลี่ยนตำแหน่งสมมติ
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Flexibility:

(english) Flexibility is the inverse of stiffness. When a force is applied to a structure, there is a displacement in the direction of the force; flexibility is the ratio of the displacement divided by the force. High flexibility means that a small load produces a large displacement.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Rock Pocket

(Concrete Engineering) Area or portion of hardened concrete which is deficient in mortar and consisting primarily of coarse aggregate and open voids; caused by insufficient consolidation or separation during placement, or both; by leakage from form.
 ศัพท์ช่างภาษาอังกฤษ – ไทย