ตัวกรองผลการค้นหา
gas producer
แปลว่าเครื่องผลิตแกส
Bloom 2
แปลว่า(english) A semi-finished hot rolled product, rectangular in cross section, produced on a blooming mill. For iron and steel, the width is not more than twice the thickness, and the cross-sectional area is usually not less than 36 sq. in. Iron and steel blooms are sometimes made by forging.
Cellular Concrete
แปลว่า(Concrete Engineering) A lightweight product consisting of portland cement, cement-pozzolan, cement sand, lime-pozzolan, or lime-sand pastes, or pastes containing blends of these ingredients and having a homogenous void or cell structure, attained with gas forming chemicals or foaming agents. For cellular concretes, containing binder ingredients other than or in addition to portland cement, autoclave curing is usually employed.
hydrodynamics
แปลว่าสาขาวิชาการเกี่ยวกับกำลังและการเคลื่อนไหวของของน้ำมันและของเหลวทั่ว ๆ ไป
clutch release arm rod
แปลว่าก้านต่อหรือสายท่ออ่อนปล่อยคลัทช์
release arm rod
แปลว่าขาปล่อยคลัทช์รถ
Basic Oxygen Process
แปลว่า(english) (BOP) A process in which molten steel is produced in a furnace by blowing oxygen into molten iron, scrap and flux materials. The furnace is known as Basic Oxygen Furnace (BOF).
By Coil
แปลว่า(english) Selling term which refers to product sold in the form of a coil vs. cut plate. "Bi Coil" is also used in production to refer to coils vs. cut plate
Baked Core
แปลว่า(english) A core which has been heated through sufficient time and temperature to produce the desired physical properties attainable from its oxidizing or thermal-setting binders.
valve connecting rod
แปลว่าก้านต่อของลิ้นเครื่องยนต์ ชนิดที่ลิ้นตั้งบนฝาสูบ
piston rod
แปลว่าก้านลูกสูบ, ขาสูบ
Bend Test
แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.