ตัวกรองผลการค้นหา
movement joint
แปลว่ารอยต่อเผื่อการเคลื่อนที่
Defect removal efficiency (DRE)
แปลว่า(Software Engineering) a nondimension ratio (between 0 and 1) that provides an indication of the degree to which errors are removed from software before it is released to end-users
Slip Form
แปลว่า(Concrete Engineering) A form which is raised or pulled as concrete is placed; may move vertically to form wails, stacks, bins or silos, usually of uniform cross section from bottom to top; or a generally horizontal direction to lay concrete evenly for highways, on slopes and inverts of canals, tunnels, and siphons.
Band, Inside
แปลว่า(english) A loose steel frame placed inside a removable flask to reinforce the sand at the parting line after the flask has been removed.
Peeling
แปลว่า(Concrete Engineering) A process in which thin flakes of matrix or mortar are broken away from concrete surface; caused by adherence of surface mortar-to forms as forms are removed, or to trowel or float in portland cement plaster.
Burn-On-Sand
แปลว่า(english) Sand adhering to the surface of the casting that is extremely difficult to remove.
Pumping (of Pavements)
แปลว่า(Concrete Engineering) The ejection of a mixture of water and solid materials such as clay or silt along cracks, transverse or longitudinal joints, and along pavement edges caused by downward slab movement due to the passage of heavy loads, machinery or equipment over the pavement after free water has accumulated in or on the subbase, subgrade or basecourse.
mover
แปลว่าตัวจักรที่ทำให้กลไกอื่นๆ หมุนหรือตามไปด้วย, ที่กระตุ้นให้เครื่องจักรหมุน
Acid Process 2
แปลว่า(english) A steel making method using an acid refractory-lined (usually silica) furnace. Neither sulfur or phosphorus is removed.
Acid Process 1
แปลว่า(english) A process of making steel, either Bessemer, open-hearth or electric, in which the furnace is lined with a siliceous refractory and for which low phosphorus pig iron is required as this element is not removed.
BREATHER
แปลว่า(english) A device which permits air to move in and out of a container or component to maintain atmospheric pressure.
Burn-Out
แปลว่า(english) Firing a mold at a high temperature to remove pattern material residue.