ตัวกรองผลการค้นหา
Base Metal Contamination
แปลว่า(english) Dirt or other impurities in the steel strip.
Blooming-Mill
แปลว่า(english) A mill used to reduce ingots to blooms, billets slabs, sheet-bar etc.,
Butyl Stearate
แปลว่า(english) (BSO)A lubricant applied on electrolytic chromium coated steel
Adeline Steelmaking Process
แปลว่า(english) Method of producing a precision casting of steel or steel alloys using aluminolthermic process and lost wax, followed by centrifugal action.
Banding Tool
แปลว่า(english) Tool used to tighten a steel band around a coil.
Chair(s)
แปลว่า(Concrete Engineering) In concrete formwork, the support for the reinforcing steel.
Bifluoride Feeder
แปลว่า(english) A machine in the Tin Mill that automatically puts bifluoride into the plater bath.
Bloom 2
แปลว่า(english) A semi-finished hot rolled product, rectangular in cross section, produced on a blooming mill. For iron and steel, the width is not more than twice the thickness, and the cross-sectional area is usually not less than 36 sq. in. Iron and steel blooms are sometimes made by forging.
Bi-Coil
แปลว่า(english) Also BY-COIL. Tin Mill term. Customers buy "by coil" or "bi-coil" rather than cut sheets
Black Oil Tempered Spring Steel Strip (Scaleless Blue)
แปลว่า(english) A flat cold rolled usually .70/.80 medium high carbon steel strip, blue-black in color, which has been quenched in oil and drawn to desired hardness. While it looks and acts much like blue tempered spring steel and carries a Rockwell hardness of C44/47, it has not been polished and is lower in carbon content. Used for less exacting requirements than clock spring steel, such as snaps, lock springs, hold down springs, trap springs, etc. It will take a more severe bend before fracture than will clock spring, but it does not have the same degree of spring-back.
Brine
แปลว่า(english) A saltwater solution for quenching or cooling when heat treating steel.
Burr
แปลว่า(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.