ผลการค้นหา

generator

แปลว่าเครื่องกำเนิดไฟฟ้า [ยานยนต์, ไฟฟ้ากำลัง]: ตัวก่อกำเนิด, ตัวสร้าง, โปรแกรมก่อกำเนิด [คอมพิวเตอร์]

Vibration

แปลว่า(Concrete Engineering) Energetic agitation of concrete to assist in its consolidation, produced by mechanical oscillating devices at moderately high frequencies. (A.) External vibration employs a device attached to the forms and is particularly applicable to the manufacture of precast items and for the vibration of tunnel lining forms. (B.) Internal vibration employs an element which can be inserted into the concrete; and is more generally used for cast-in-place construction.

direct current generator

แปลว่าเครื่องกำเนิดไฟฟ้ากระแสตรง (หรือเรียกว่า ไดนาโม)

constant current generator

แปลว่าเครื่องกำเนิดไฟฟ้ากระแสค่าคงตัว

regenerative braking

แปลว่าการเดินเครื่องมอเตอร์ให้เป็นเหมือนไดนาโมด้วยโหลดหรืองานเพื่อให้รับความต้านในการหยุดเครื่อง

Brown Sharp Gages

แปลว่า(english) A standard series of sizes refered to by numbers, in which the diameter of wire or thickness of sheet metal is generally produced and which is used in the manufacture of brass, bronze, copper, copper-base alloys and aluminum. These gage numbers have a definite relationship to each other. In this system, the decimal thickness is reduced by 50% every six gage numbers- while temper is expressed by the number of B&S gage numbers as cold reduced in thickness from previous annealing. For each B&S gage number in thickness reduction, where is assigned a hardness value of 1/4 hard.

regenerative control

แปลว่าวิธีการควบคุมปั้นจั่นไฟฟ้า โดยมีชันท์มอเตอร์ส่งกำลังในขณะยกแขนปั้นจั่นขึ้น

Mass balance

แปลว่า(Environmental Engineering) An organized accounting of all inputs and outputs to an arbitrary but defined system. Stated in other terms, the rate of mass accumulation within a system is equal to the rate of mass input less the rate of mass output plus the rate of mass generation within the system.

induction generator

แปลว่าเครื่องดูด (กระแสไฟตรง) อากาศหรือดูดฝุ่นแบบเดียวกับ induction motor

Slip Form

แปลว่า(Concrete Engineering) A form which is raised or pulled as concrete is placed; may move vertically to form wails, stacks, bins or silos, usually of uniform cross section from bottom to top; or a generally horizontal direction to lay concrete evenly for highways, on slopes and inverts of canals, tunnels, and siphons.

Ductility:

แปลว่า(english) Ductility generally refers to the amount of inelastic deformation which a material or structure experiences before complete failure. Quantitatively, ductility can be defined as the ratio of the total displacement or strain at failure, divided by the displacement or strain at the elastic limit.

Bainite

แปลว่า(english) A eutectoid transformation product of ferrite and a fine dispersion of carbide, generally formed at temperatures below 840 to 930 F (450 to 500 C): upper bainite is an aggregate containing parallel lath-shape units of ferrite, produces the so-called feathery appearance in optical microscopy, and is formed at temperatures above about 660 F (350 C); lower bainite consists of individual plate-shape units and is formed at temperatures below about 660 F (350 C). Also, a slender, needle-like (acicular) microstructure appearing in spring steel strip characterized by toughness and greater ductility than tempered Martensite. Bainite is a decomposition product of Austenite best developed at interrupted holding temperatures below those forming fine pearlite and above those giving Martensite.