ผลการค้นหา

คำศัพท์/สำนวน บทความ  หาอะไรก็เจอ!
ค้นเจอ 387 รายการ

Ductility:

แปลว่า(english) Ductility generally refers to the amount of inelastic deformation which a material or structure experiences before complete failure. Quantitatively, ductility can be defined as the ratio of the total displacement or strain at failure, divided by the displacement or strain at the elastic limit.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Brine

แปลว่า(english) A saltwater solution for quenching or cooling when heat treating steel.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Internal force:

แปลว่า(english) Forces which hold an object together when external forces or other loads are applied. Internal forces are sometimes called resisting forces since they resist the effects of external forces.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Boring Tool

แปลว่า(english) A cutting tool in which the tool bit,the boring bar and in some cases the tool holder are incorporated.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Modulus of elasticity:

แปลว่า(english) The proportional constant between stress and strain for material with linear elastic behavior: calculated as stress divided by strain. Modulus of elasticity can be interpreted as the slope of the stress-strain graph. It is usually denoted as E, sometimes known as Young's Modulus Y, or E-Modulus.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Blister

แปลว่า(english) 1) Coating defect consisting of the formation of bubbles in a coating, which appear as hemispherical elevations. The blisters are hollow, and are usually caused by entrapped air or solvent. 2) A raised spot on the surface on the surface of metal due to expansion of gas which causes a subsurface metal separation such as inclusions and small laminations.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

BACKUP BOTTLE

แปลว่า(english) A vessel, normally cylindrical, which is used to store gas for future release of the energy in the compressed gas to an accumulator.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Deflection:

แปลว่า(english) This word usually carries the same meaning as displacement, although it is sometimes used in place of deformation.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Burn

แปลว่า(english) 1) Process of cutting metal by a stream of fuel and oxygen, 2) to permanently damage a metal or alloy by heating to cause either incipient melting or intergranular oxidation.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Burr

แปลว่า(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Brittle Inter-metallic Layer

แปลว่า(english) An iron-zinc alloy layer formed between the steel substrate and the free zinc of galvanized coatings.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Burn-On-Sand

แปลว่า(english) Sand adhering to the surface of the casting that is extremely difficult to remove.
 ศัพท์ช่างภาษาอังกฤษ – ไทย