ตัวกรองผลการค้นหา
Spall
แปลว่า(Concrete Engineering) A fragment, usually of flaky shape, detached from a larger mass by pressure, expansion from within the larger mass, a blow, or by the action of weather.
Portland Blast- slag Cement Furnace (ASTM C 595)
แปลว่า(Concrete Engineering) The product obtained by intimately intergrinding or an intimate and uniform blending a mixture of granulated blast furnace slag and portland-cement clinker
GFRC - Glass Fiber Reinforced Concrete
แปลว่า(Concrete Engineering) Concrete panels, usually architectural designs, reinforced with a high zirconia (16% minimum), alkali-resistant glass fiber. Optimum glass fiber content of 5% by weight. Lower fiber content results in lower early ultimate strengths, higher fiber content can produce composite compaction and consolidation difficulties.
Holding Period Period
แปลว่า(Concrete Engineering) In the manufacture of concrete products, the period between completion of casting and the introduction of additional heat or the steam curing period
Tilt-up
แปลว่า(Concrete Engineering) A method of concrete construction such as where members are cast horizontally near their eventual position, usually on a recently placed slab, and then tilted into place after removal of forms.
Air Content
แปลว่า(Concrete Engineering) The amount of entrained or entrapped air in concrete or mortar, exclusive of pore space in aggregate particles, usually expressed as a percentage of total volume of concrete or mortar.
Sulfate Attack
แปลว่า(Concrete Engineering) Deleterious chemical and/or physical re-action between sulfates in ground water or soil and certain constituents in cement, which result in expansion and disruption of the concrete.
Revibration
แปลว่า(Concrete Engineering) Delayed vibration of concrete that has already been placed and consolidated. Most effective when done at the latest time a running vibrator will sink of its own weight into the concrete and make it plastic and workable again.
Dispersing Agent
แปลว่า(Concrete Engineering) An admixture capable of increasing the fluidity of pastes, mortars, or concretes by reduction of interparticle attraction.
Maximum Size Aggregate
แปลว่า(Concrete Engineering) Aggregate whose largest particle size is present in sufficient quantity to affect the physical properties of concrete; generally designated by the sieve size on which the maximum amount permitted to be retained is 5 or 10 percent by weight.
Cold Joint
แปลว่า(Concrete Engineering) A visible lineation which forms when the placement of concrete is delayed. The concrete in place hardens prior to the next placement of concrete against it.
Vaporproof
แปลว่า(Concrete Engineering) A material that is totally immune to the passage of a gas under pressure. Any material that is truly vaporproof will inherently be waterproof.