ผลการค้นหา

Strength:

แปลว่า(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.

severy

แปลว่าห้องในเพดาน หลังคาโค้ง โดยเฉพาะการก่อสร้างสถาปัตยกรรมแบบโกธิค

Brittle:

แปลว่า(english) A brittle structure or material exhibits low ductility, meaning that it exhibits very little inelastic deformation before complete failure.

Colloids

แปลว่า(Environmental Engineering) Small particles which have a negligible settling velocity. These particles have a very small mass so gravitational force is low compared to surface frictional forces. Typical colloidal sizes range from 10-3 mm to 1 mm.

Zircon

แปลว่า(english) The mineral zircon silicate, ZrSiO4, a very high melting point acid refractory material used as a molding material in steel foundries.

main delivery filter

แปลว่าที่กรองจ่ายน้ำมันหล่อลื่นของท่อจ่ายน้ำมันใหญ่

Yield stress:

แปลว่า(english) A material loaded beyond its yield stress, no longer exhibits linear elastic behavior. Metals, particularly mild steel, generally have a very well defined yield stress compared to other materials. Yield stress is sometimes called yield strength.

farm irrigation efficiency

แปลว่าประสิทธิภาพการส่งน้ำที่แปลงนา : ดู farm delivery efficiency

oil delivery pipe

แปลว่าท่อส่งน้ำมันหล่อลื่น

Bismuth

แปลว่า(english) Chemical symbol Bi. A soft, course cystalline heavy metal with a silvery white color and pinkish tinge; usually produced as a by-product of copper,leaad and other metals. Has a thermal conductivity lower than all other metals except mercury. Used as alloying agent but leading use is in pharmaceuticals.

Brown Sharp Gages

แปลว่า(english) A standard series of sizes refered to by numbers, in which the diameter of wire or thickness of sheet metal is generally produced and which is used in the manufacture of brass, bronze, copper, copper-base alloys and aluminum. These gage numbers have a definite relationship to each other. In this system, the decimal thickness is reduced by 50% every six gage numbers- while temper is expressed by the number of B&S gage numbers as cold reduced in thickness from previous annealing. For each B&S gage number in thickness reduction, where is assigned a hardness value of 1/4 hard.

C.O.D

แปลว่าอักษรย่อของ collect on delivery = พัสดุเก็บเงินปลายทาง