ผลการค้นหา

Make-buy decision

แปลว่า(Software Engineering) determining whether software should be built internally, acquired, contracted or built from reusable components

Bend Test

แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

Bent Axis Pumps

แปลว่า(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.

shoulder

แปลว่าบ่า [การพิมพ์, วิชาถ่ายภาพ]; ไหล่ทาง [โยธา]; ไหล่ถนน [สำรวจ]

shoulder screw

แปลว่าสลักเดือย , เป็นสลักเกลียวที่มีส่วนบนเป็นบ่ายัน ซึ่งส่วนบนของบ่าจำเป็นต้องยาวกว่าส่วนแกนเกลียวเล็กน้อย

Bridling

แปลว่า(english) The cold working of dead soft annealed strip metal immediately prior to a forming, bending, or drawing operation. A process designed to prevent the formulation of Luder's lines. Caution-Bridled metal should be used promptly and not permitted to (of itself) return to its pre-bridled condition.

Go, no-go decision

แปลว่า(Software Engineering) a point at which manager or the customer decides whether the project should proceed