ผลการค้นหา

คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 29 รายการ

Adapters

แปลว่า(english) Steel segments that are bolted to the reel mandrel to increase their diameter so that large (24" ID) coils can be run.

Bonderizing

แปลว่า(english) The coating of steel with a film composed largely of zinc phosphate in order to develop a better bonding surface for paint or lacquer.

enlarge

แปลว่าขยาย ทำให้ใหญ่ขึ้น

large areas

แปลว่าที่ดินกว้างใหญ่, เนื้อที่กว้างขวาง

large-capacity sump

แปลว่าอ่างบรรจุน้ำมันหล่อลื่นขนาดใหญ่ของเครื่องยนต์

Stability:

แปลว่า(english) Stability is best defined as the opposite of instability, which is the occurrence of large structural deformations which are not the result of material failure.

Baller Stick

แปลว่า(english) Octagon-shaped wooden stick approximately 5' long. This stick is used in the baller area, to change burr mashers, to start a coil with a large ID, etc.

Batch Anneal

แปลว่า(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.

Base Metal

แปลว่า(english) (1) The metal present in the largest proportion in an alloy; (2) the metal to be brazed, cut or welded; (3) after welding the part of the metal that was not melted during the process.

Bull Gear

แปลว่า(english) The large crank gear of a shaper.

Stiffness:

แปลว่า(english) This is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness means that a large force produces a small displacement. When discussing the stiffness of a material, the concept is the same, except that stress substitutes for force, and strain substitutes for displacement; see modulus of elasticity.

Acme Thread

แปลว่า(english) A screw thread having a 29 degree included angel. Used largely for feed and adjusting screws on machine tools.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด