ผลการค้นหา

ค้นเจอ 45 รายการ

หรือคุณกำลังค้นหา formation

elastic deformation

(หล่อหลอม) ลักษณะที่ผิดรูป, เกิดจากการหดตัวกลับเข้าสู่สภาพของรูปเดิมของวัตถุที่ดัดแปลงแล้ว

force transformation matrix

เมตริกแปลงของแรง

Information System

ระบบข้อมูล, ข่าวสาร

Hydrologic Cycle

(Concrete Engineering) The Hydrologic Cycle consists of the evaporation of water from oceans and other bodies of open water; condensation to produce cloud formations; precipitation of rain, snow, sleet or hail upon land surfaces; dissipation of rain or melted solids by direct run-off into lakes and by seepage into the soil. Thereby producing a continuing endless source of water in the sub-grade.

Resources

(Software Engineering) anything that is required to get the project done, people, hardware, materials, information, etc.

Stability:

(english) Stability is best defined as the opposite of instability, which is the occurrence of large structural deformations which are not the result of material failure.

Linear:

(english) A structure is said to behave linearly when its the deformation response is directly proportional to the loading (i.e. doubling the load doubles the displacement response). For a material, linear means that the stress is directly proportional to the strain.

Aspect-oriented development

(Software Engineering) a development approach that emphasizes "concerns" (also called "aspectual requirements" that incorporate features, functions and information content) that cut across multiple system functions

Plastic Consistency

(Concrete Engineering) Condition in which concrete, mortar, or cement paste will sustain deformation continuously in any direction without rupture.

Deformation:

(english) A change in the shape of an object or material.

Ductility:

(english) Ductility generally refers to the amount of inelastic deformation which a material or structure experiences before complete failure. Quantitatively, ductility can be defined as the ratio of the total displacement or strain at failure, divided by the displacement or strain at the elastic limit.

Blister

(english) 1) Coating defect consisting of the formation of bubbles in a coating, which appear as hemispherical elevations. The blisters are hollow, and are usually caused by entrapped air or solvent. 2) A raised spot on the surface on the surface of metal due to expansion of gas which causes a subsurface metal separation such as inclusions and small laminations.

ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด