ผลการค้นหา

Rotation:

แปลว่า(english) Motion of an object where the path of every point is a circle or circular arc. A rotation is defined by a point and vector which determine the axis of rotation. The direction of the vector is the direction of the axis and the magnitude of the vector is the angle of rotation.

Bend Test

แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

direction of magnetic flux

แปลว่าทิศทางของแรงดึงดูดเกี่ยวกับแม่เหล็ก ซึ่งหมายถึงทิศทางจากขั้วเหนือมายังขั้วใต้ในสนามแม่เหล็ก

direction indicator

แปลว่าไฟสัญญาณต่างๆ ของรถ เช่น ไฟเลี้ยว ไฟห้ามล้อ

direction signal

แปลว่า(รถยนต์) สัญญาณไฟยกเลี้ยวที่ใช้อยู่ในรถยนต์

Line of Action:

แปลว่า(english) The line of action of a force is the infinite line defined by extending along the direction of the force from the point where the force acts.

Slip Form

แปลว่า(Concrete Engineering) A form which is raised or pulled as concrete is placed; may move vertically to form wails, stacks, bins or silos, usually of uniform cross section from bottom to top; or a generally horizontal direction to lay concrete evenly for highways, on slopes and inverts of canals, tunnels, and siphons.

Plastic Consistency

แปลว่า(Concrete Engineering) Condition in which concrete, mortar, or cement paste will sustain deformation continuously in any direction without rupture.

Burr

แปลว่า(english) The very subtle ridge on the edge of strip steel left by cutting operations such as slitting, trimming, shearing, or blanking. For example, as a steel processor trims the sides of the sheet steel parallel or cuts a sheet of steel into strips, its edges will bend with the direction of the cut.

Vector:

แปลว่า(english) A mathematical entity having a magnitude and a direction in space.

Batch Anneal

แปลว่า(english) The process by which a large, stationary stack of steel coils (4 coils high) is subjected to a long heat-treating cycle. This process enables the cold-rolled sheet to fully recrystallize into the softest possible product conforming to customer specifications. Controlling the recrystallization process makes a fine-grained microstructure easy to obtain, and minimizes the tendencies for retention of directional properties of the rolled steel which could produce undesirable shapes in the stamping of a cylindrical part such as a can. Also see Anneal and Continuous Anneal.

Stiffness:

แปลว่า(english) This is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness means that a large force produces a small displacement. When discussing the stiffness of a material, the concept is the same, except that stress substitutes for force, and strain substitutes for displacement; see modulus of elasticity.