ผลการค้นหา

Object-oriented design (OOD)

แปลว่า(Software Engineering) a technique for translating the OOA model into an implementation model

Notice of the Commencement

แปลว่าหนังสือบอกกล่าวให้เริ่มงาน

Preplaced Concrete

แปลว่า(Concrete Engineering) Concrete manufactured by placing clean, graded coarse aggregate in a form and later injecting a portland cement-sand grout under pressure, to fill the voids.

BURST PRESSURE

แปลว่า(english) The level of pressure at which a component, pipe, tube, hose or other fluid passage will burst during application of internal pressure. Normally 2.5 - 4.0 times working pressure.

Flocculant settling

แปลว่า(Environmental Engineering) Settling in which particle concentrations are sufficiently high that particle agglomeration occurs. This results in a reduction in the number of particles and an increase in average particle mass. As agglomeration occurs higher settling velocities result.

Pressure:

แปลว่า(english) Pressure is a similar idea to stress, the force intensity at a point, except that pressure means something acting on the surface of an object rather than within the material of the object. When discussing the pressure within a fluid, the meaning is equivalent to stress.

Runoff

แปลว่า(Environmental Engineering) The water that flows overland to lakes or streams during and shortly after a precipitation event.

Bow

แปลว่า(english) The lateral deviation from straightness

Inelastic:

แปลว่า(english) Not surprisingly, the opposite of elastic. A deformation of a structure or material under load is described as inelastic when the deformation remains after the load is removed. The term plastic is often used with the same meaning.

Dump

แปลว่า(Environmental Engineering) An illegal and uncontrolled area where wastes have been placed on or in the ground. See Landfill.

Bit, Tool (cutter)

แปลว่า(english) A hardened steel bar or plate that is shaped accordidng to the operation to be performed and the material to be machined.

Bare Spot

แปลว่า(english) A location on the strip where coating did not adhere.