ผลการค้นหา

Backing Board (Backing Plate)

แปลว่า(english) A second bottom board on which molds are opened.

voltage regulator terminal board

แปลว่าแผงติดตั้งสวิทช์ควบคุมแรงดันของไฟฟ้า

Sulfate Resistance

แปลว่า(Concrete Engineering) Ability of cement paste, aggregate, or mixtures thereof to withstand sulfate attack.

Plastic Consistency

แปลว่า(Concrete Engineering) Condition in which concrete, mortar, or cement paste will sustain deformation continuously in any direction without rupture.

f.o.b

แปลว่าย่อมาจากคำเต็มว่า free on board คือ ผู้ขายออกค่าขนส่งให้จนถึงลงเรือสินค้าหรือถึงรถบรรทุก

Davey

แปลว่าชื่อกระดาษแข็งชนิดดีที่สุดสำหรับใช้ทำปกหนังสือ ท้องตลาดซื้อขายกันโดยใช้ชื่อเรียกกันว่า Darey board

Plasticity

แปลว่า(Concrete Engineering) Property of freshly mixed concrete, cement paste or mortar which determines its ease of molding or resistance to deformation.

Cement Gel

แปลว่า(Concrete Engineering) The colloidal gel (glue like) material that makes up the major portion of the porous mass of which hydrated cement paste is composed.

Plastic

แปลว่า(Concrete Engineering) A condition of freshly mixed concrete. mortar or cement -paste indicating that it is workable and readily re-moldable, is cohesive, and has an ample content of fines and cement but is not over wet.

AAC - Autoclaved Aerated Concrete

แปลว่า(Concrete Engineering) Exceptionally lightweight precast concrete with high thermal qualities and fire resistence. Suitable for cutting with ordinary hand tools. Mix design is composed of portland cement, sand or siliceous material, lime, gypsum, finely powdered aluminum, and water. Initial mix is a combination of portland cement, sand, lime and gypsum to produce a slurry. Finely powdered aluminum mixed into a paste is added prior to placement into large, rail-like forms. The finely powdered aluminum reacts with the alkaline components of the cement and lime to produce hydrogen gas, which increases the volume approximately five times producing a uniformly, dispersed cellular structure. Units are cut to required shape. Units are placed in an autoclave, an enclosed pressurized chamber, and steam cured at 3500 F. Approximately 80% of the ultimate volume consists of air voids.