ผลการค้นหา

Temper

แปลว่า(Concrete Engineering) The addition of water to the cement mix whether at the batch plant, during transit or at the jobsite to achieve the specified water to cement ratio.

Backoff

แปลว่าRemoval of part of coil from entry end of unit; may be necessitated by a defect in coil or by a wreck in the mill, etc. Backoff weight is the part of the coil that is removed and not finished/produced.

Blowhole 2

แปลว่า(english) A cavity which was produced during the solidification of metal by evolved gas, which in failing to escape is held in pockets.

Flocculant settling

แปลว่า(Environmental Engineering) Settling in which particle concentrations are sufficiently high that particle agglomeration occurs. This results in a reduction in the number of particles and an increase in average particle mass. As agglomeration occurs higher settling velocities result.

Brinell Hardness Test

แปลว่า(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.

Quality function deployment (QFD)

แปลว่า(Software Engineering) a technique that translates the needs of a customer in technical requirements for software by assessing the value of each requirement

in whole or partial

แปลว่าทั้งหมดหรือบางส่วน

Climatology

แปลว่า(Environmental Engineering) The study of the climate, how the earth's atmosphere performs over long periods of time.

Pretensioning

แปลว่า(Concrete Engineering) A method of prestressing reinforced concrete in which the steel is stressed before the concrete has hardened and restrained from gaining its unstressed position by bond to the concrete.

Base

แปลว่า(english) The steel or concrete pedestal on which the coils are stacked during the batch annealing process.

Bed-In

แปลว่า(english) Method whereby drag may be rammed in the pit or flask without necessity of rolling over. Process used in production of heavy castings.

Rotation:

แปลว่า(english) Motion of an object where the path of every point is a circle or circular arc. A rotation is defined by a point and vector which determine the axis of rotation. The direction of the vector is the direction of the axis and the magnitude of the vector is the angle of rotation.