ผลการค้นหา

Vibration

แปลว่า(Concrete Engineering) Energetic agitation of concrete to assist in its consolidation, produced by mechanical oscillating devices at moderately high frequencies. (A.) External vibration employs a device attached to the forms and is particularly applicable to the manufacture of precast items and for the vibration of tunnel lining forms. (B.) Internal vibration employs an element which can be inserted into the concrete; and is more generally used for cast-in-place construction.

Brown Sharp Gages

แปลว่า(english) A standard series of sizes refered to by numbers, in which the diameter of wire or thickness of sheet metal is generally produced and which is used in the manufacture of brass, bronze, copper, copper-base alloys and aluminum. These gage numbers have a definite relationship to each other. In this system, the decimal thickness is reduced by 50% every six gage numbers- while temper is expressed by the number of B&S gage numbers as cold reduced in thickness from previous annealing. For each B&S gage number in thickness reduction, where is assigned a hardness value of 1/4 hard.

Alkali-Aggregate Reaction

แปลว่า(Concrete Engineering) Older terminology for Alkali-Silica Reactivity (ASR).

Slip Form

แปลว่า(Concrete Engineering) A form which is raised or pulled as concrete is placed; may move vertically to form wails, stacks, bins or silos, usually of uniform cross section from bottom to top; or a generally horizontal direction to lay concrete evenly for highways, on slopes and inverts of canals, tunnels, and siphons.

Risk Management and Monitoring Plan (RMMP)

แปลว่า(Software Engineering) a plan for mitigating, monitoring and managing risks

Modulus of elasticity:

แปลว่า(english) The proportional constant between stress and strain for material with linear elastic behavior: calculated as stress divided by strain. Modulus of elasticity can be interpreted as the slope of the stress-strain graph. It is usually denoted as E, sometimes known as Young's Modulus Y, or E-Modulus.

Consistency

แปลว่า(Concrete Engineering) The degree of plasticity of fresh concrete or mortar The normal measure of consistency is slump for concrete and flow for mortar.

Brale

แปลว่า(english) A diamond penetrator, conical in shape, used with a Rockwell hardness tester for hard metals.

impulse extractor

แปลว่าเครื่องมือที่ใช้ในการถอดเพลาท้ายของรถ (ต้องใช้ร่วมกับเครื่องมือ ถอดมู่เล่ข้อเหวี่ยง extractor for crankshaft puller)

Z-Mill

แปลว่า(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.

Block, Jo

แปลว่า(english) Shop name for a Johnnson gage block, a very accurate measuring device.

post for fence

แปลว่าเสาซึ่งหล่อโดยเฉพาะสำหรับทำรั้วขึงลวดหนามกั้น