ผลการค้นหา

Linear Elastic:

แปลว่า(english) A force-displacement relationship which is both linear and elastic. For a structure, this means the deformation is proportional to the loading, and deformations disappear on unloading. For a material, the concept is the same except strain substitutes for deformation, and stress substitutes for load.

color for tempering

แปลว่าลักษณะของสีในการชุบเหล็ก, ซึ่งจะปรากฏสีดังต่อไปนี้, สีขาว, สีฟางข้าวอ่อน, สีฟางข้าวเข้ม, สีฟ้าและสีม่วง, การตรวจสอบสีในการชุบเป้นไปตามอันดับสี จนกระทั่งถึงสีแสดงความเข้มเท่าที่ต้องการ

Slump Cone

แปลว่า(Concrete Engineering) A metal mold in the form of a truncated cone with a top diameter of 4”, a bottom diameter of 8”, and a height of 12”, used to fabricate the specimen for a slump test.

Payment for Plant and Material in event of Suspension

แปลว่าการชำระเงินค่าโรงงานและวัสดุอุปกรณ์ในกรณีการสั่งหยุดงานชั่วคราว

Break Test (for tempered steel)

แปลว่า(english) A method of testing hardened and tempered high carbon spring steel strip wherein the specimen is held and bent across the grain in a vice-like calibrated testing machine. Pressure is applied until the metal fractures at which point a reading is taken and compared with a standard chart of brake limitations for various thickness ranges.

Closure

แปลว่า(Environmental Engineering) The act of preparing a landfill for long term inactivity, including placement of a cover over the landfill to prevent infiltration of surface water.

Zr

แปลว่า(english) Chemical symbol for Zirconium

Estimation

แปลว่า(Software Engineering) a project planning activity that attempts to project effort and cost for a software project

paint for concrete

แปลว่าสีสำหรับทาคอนกรีตเป็นสีที่ทำขึ้นจาก zinc oxide หรือ barium sulphate ผสมกับน้ำมันตั้งอิ๊ว ซึ่งนิยมใช้แบบนี้กันมาก

Kelly Ball

แปลว่า(Concrete Engineering) A device for determining the consistency of fresh concrete. It is sometimes used as an alternative to the slump test.

Bend Test

แปลว่า(english) Various tests which is used to ascertain the toughness and ductility of a metal product, in which the material is bent around its axis and/ or around an outside radius. A complete test might specify such a bend to be both with and against the direction of grain. For testing, samples should be edge filed to remove burrs and any edgewise cracks resulting from slitting or shearing. If a vice is to be employed, then you must line the jaws with some soft metal, to permit a flow of the metal in the piece being tested.

Quality function deployment (QFD)

แปลว่า(Software Engineering) a technique that translates the needs of a customer in technical requirements for software by assessing the value of each requirement