ผลการค้นหา

make and break

แปลว่า(ไฟฟ้า) ต่อและตัดวงจร เป็นคำที่ใช้อยู่ในวงการไฟฟ้า ซึ่งหมายถึงการตัดและต่อกระแสไฟออกเป็นระยะๆ ในเครื่องแม็กนิโต

Payment for Plant and Materials in Event of Suspension

แปลว่าการชำระเงินค่าอุปกรณ์และวัสดุในกรณีการสั่งหยุดงานชั่วคราว

Acid Steel

แปลว่า(english) Steel melted in a furnace with an acid bottom and lining and under a slag containing an excess of an acid substance such as silica.

Primary treatment

แปลว่า(Environmental Engineering) Treatment which includes all operation prior to and including primary treatment, e.g., bar screening, grit removal, comminution, and primary sedimentation.

Stress:

แปลว่า(english) The intensity of internal force acting at a point in an object. Stress is measured in units of force per area. See shear stress and normal stress.

Bronze

แปลว่า(english) An alloy containing 90% copper and 10% tin. Used for screws, wire, hardware, wear plates, bushings and springs; it is somewhat stronger than copper and brass and has equal or better ductility.

Operation and Maintenance manuals

แปลว่าคู่มือปฏิบัติและบำรุงรักษา

Metabolism

แปลว่า(Environmental Engineering) The processes which sustain an organism, including energy production, synthesis of proteins for repair and replication.

Rock Pocket

แปลว่า(Concrete Engineering) Area or portion of hardened concrete which is deficient in mortar and consisting primarily of coarse aggregate and open voids; caused by insufficient consolidation or separation during placement, or both; by leakage from form.

Linear Elastic:

แปลว่า(english) A force-displacement relationship which is both linear and elastic. For a structure, this means the deformation is proportional to the loading, and deformations disappear on unloading. For a material, the concept is the same except strain substitutes for deformation, and stress substitutes for load.

Force:

แปลว่า(english) A directed interaction between two objects that tends to change the momentum of both.Since a force has both direction and magnitude, it can be expressed as a vector

Slump Cone

แปลว่า(Concrete Engineering) A metal mold in the form of a truncated cone with a top diameter of 4”, a bottom diameter of 8”, and a height of 12”, used to fabricate the specimen for a slump test.