ผลการค้นหา

Component (also called Software component)

แปลว่า(Software Engineering) a named, modular building block for computer software

Alkalinity

แปลว่า(Environmental Engineering) The capacity of a water to neutralize acids.

Backing Board (Backing Plate)

แปลว่า(english) A second bottom board on which molds are opened.

Procedural design

แปลว่า(Software Engineering) creates representations of algorithmic detail within a module

Six sigma

แปลว่า(Software Engineering) a widely used strategy for statistical quality assurance

Cell

แปลว่า(Environmental Engineering) A unit of varying dimensions in a landfill which is isolated from the environment by 6 to 12 inches of soil cover. A cell is one day's waste or less. A cell is covered with soil at the end of each day.

Bonding Clay (Bonderise)

แปลว่า(english) Any clay suitable for use as a bonding material.

Scope

แปลว่า(Software Engineering) a bounded statement of what must be accomplished

Prototyping

แปลว่า(Software Engineering) the creation of a mock-up of an application

Brinell Hardness Test

แปลว่า(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.

Stiffness:

แปลว่า(english) This is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness means that a large force produces a small displacement. When discussing the stiffness of a material, the concept is the same, except that stress substitutes for force, and strain substitutes for displacement; see modulus of elasticity.

Support:

แปลว่า(english) A support contributes to keeping a structure in place by restraining one or more degrees of freedom. In a structural model, supports represent boundary entities which are not included in the model itself, e.g., foundations, abutments, or the earth itself. For each restrained translation degree of freedom at a support, there is a corresponding reaction force; for each restrained rotation degree of freedom, there is a reaction moment.