ผลการค้นหา

Zinc

แปลว่า(english) Chemical Symbol Zn. Element No. 30 of the periodic system; atomic weight 65.38. Blue-white metal; when pure, malleable and ductile even at ordinary temperatures; melting point 787 (degrees) F.; boiling point 1665 (degrees) F., specific gravity 7.14. Can be electrodeposited; it is extensively used as a coating for steel and sheet zinc finds many outlets, such as dry batteries, etc. Zinc-base alloys are of great importance in die casting. Its most important alloy is brass.

Stress resultant:

แปลว่า(english) A system of forces which is statically equivalent to a stress distribution over an area.

Bright Bessemer Wire

แปลว่า(english) Stiff bright wire of hard temper. Normally wire is drawn down to size without annealing.

Blast Furnace 2

แปลว่า(english) A vertical shaft type smelting furnace in which an air blast is used, usually hot, for producing pih iron. The furnace is continuous in operation using iron ore, coke, and limestone as raw materials which are charged at the top while the molten iron and slag are collected at the bottom and are tapped out at intervals.

Billet container

แปลว่า(english) The part of the extrusion press into which the billet to be extruded is placed.

Resources

แปลว่า(Software Engineering) anything that is required to get the project done, people, hardware, materials, information, etc.

Aerobes

แปลว่า(Environmental Engineering) Organisms which require molecular oxygen as an electron acceptor for energy production. See anaerobes.

Non-evaporable Water

แปลว่า(Concrete Engineering) The water in concrete which is irremovable by oven drying; chemically combined during cement hydration.

Change control authority (CCA)

แปลว่า(Software Engineering) the person(s) who have responsibility for deciding whether a change is to be made

Box Annealing

แปลว่า(english) Annealing a metal or alloy in a sealed container under conditions that minimize oxidation. In box annealing a ferrous alloy, the charge is usually heated slowly to a temperature below the transformation range, but sometimes above or within it, and is then cooled slowly; this process is also called close annealing or pot annealing.

Automatic code generation

แปลว่า(Software Engineering) tools that generate source code from a representation of software that is not source code

Ac3

แปลว่า(english) In hypoeutectoid steel, the temperature at which transformation of ferrite into austenite is completed upon heating.