ค้นเจอ 610 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "on the wing"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

Builtup Plate

(english) "A pattern plate of suitable material, with the cope pattern mounted on or attached to one side; the drag pattern may be attached to the other side or to a separate mounting. See Matchplate "

Troposphere

(Environmental Engineering) The lower atmosphere, from the earth's surface to approximately 12 km. This portion of the earth's atmosphere contains about 95 percent of the atmospheric gases. The temperature gradually declines through this region.

Customer

(Software Engineering) the person or group that has requested the software and will be paying the bill for its development

Organic compound

(Environmental Engineering) Any compound containing carbon except for the carbonates (carbon dioxide, the carbonates and bicarbonates), the cyanides, and cyanates.

Bauxite

(english) The only commercial ore of aluminum, corresponding essentially to the formula Al2O3xH2O.

Measurement

(Software Engineering) collecting quantitative data about the software or the software engineering processMetrics

Architectural design

an activity that attempts to layout the module "floor plan" for the software

Blow

(english) The impact or force delivered by one workstroke of the forging equipment.

Unit Water Content

(Concrete Engineering) The quantity of water per unit volume of freshly mixed concrete, often expressed as gallons or pounds per cubic yard. This is the quantity of water on which the water cement ratio is based, and does not include water absorbed by the aggregate

Blow Back

(english) A coating defect consisting of a lower coating film weight on the bottom of the coated sheet caused by high velocity air in the oven. Blow back usually occurs with high solids coatings which have little solvent to evaporate and "set" the film.

Linear Elastic:

(english) A force-displacement relationship which is both linear and elastic. For a structure, this means the deformation is proportional to the loading, and deformations disappear on unloading. For a material, the concept is the same except strain substitutes for deformation, and stress substitutes for load.

Dump

(Environmental Engineering) An illegal and uncontrolled area where wastes have been placed on or in the ground. See Landfill.


 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z