ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
แหวนยางสำหรับร้อยสายไฟฟ้าผ่านโลหะ, ห่วงยาง, ปลอกยางฉนวนในช่องโลหะ
(Concrete Engineering) The deposit of a gray scum or gray dust on the inside surface of a subgrade wall or floor; as the result of moisture moving through the concrete and washing certain chemicals from the concrete mass.
เครื่องวัดความกดของอากาศ, ปรอทวัด
สีส้มที่ทำจากโครเมี่ยม
(Environmental Engineering) (FSS) is the matter remaining from the suspended solids analysis which will not burn at 550°C. It represents the non-filterable inorganic residue in a sample.
(Environmental Engineering) The synthesis of the energy storage compound adenosine triphosphate (ATP) from adenosine diphosphate (ADP).
(Environmental Engineering) Autotrophic organisms which produce protoplasm using inorganic carbon and energy from the sun.
(english) Method of determining the hardness of materials; involves impressing a hardened ball of specified diameter into the material surface at a known pressure (10-mm ball, 500-kg load for aluminum alloys). The Brinell hardness number results from calculations involving the load and the spherical area of the ball impression. Direct-reading testing are generally used for routine inspection of forgings, and as a heat treat control function.
สีเหลืองที่ทำจากโครเมี่ยม
(english) (1) A semi-finished section hot rolled from a metal ingot, with a rectangular cross section usually ranging from 16 to 36 in., the width being less than twice the thickness. Where the cross section exceeds 36 in., the term “bloom” is properly but not universally used. Sizes smaller than 16 in. are usually termed “bars”; a solid semi-finished round or square product which has been hot worked by forging, rolling, or extrusion. (2) A semi-finished, cogged, hot rolled or continuous-cast metal product of uniform section, usually rectangular with radiused corners. Billets are relatively larger than bars.
(Environmental Engineering) The biological oxidation of ammonia and ammonium sequentially to nitrite and then nitrate. It occurs naturally in surface waters, and can be engineered in wastewater treatment systems. The purpose of nitrification in wastewater treatment systems is a reduction in the oxygen demand resulting from the ammonia.
แร่นิเกิล ผสมโครเมี่ยม