ผลการค้นหา

Broaching

แปลว่า(english) Smoothing machined holes or outside surfaces of castings by drawing pushing on or more broaches (special cutting tools) through the roughed out hole.

Waste minimization

แปลว่า(Environmental Engineering) The elimination or reduction of a waste prior to its generation. This is accomplished by process changes rather than waste treatment methods.

Absolute Volume

แปลว่า(Concrete Engineering) The volume of an ingredient in its solid state, without voids between individual pieces or particles, in the case of fluids, the cubic content occupied. In concrete, the actual volume occupied by the different ingredients determined by dividing the weight of each ingredient pounds, by ifs specific gravity, times the weight of one cubic foot of water in pounds. Example: Absolute Volume of one sack of cement equals: 94 ๗ (3.15X62.4) = 0.478 cubic feet

Primary standards

แปลว่า(Environmental Engineering) Required drinking water quality standards related directly to human health. These standards are required and enforceable by the U.S. EPA. See secondary standards.

Bead

แปลว่า(english) 1)Half-round cavity in a mold, or half-round projection or molding on a casting, 2) a single deposit of weld metal produced by fusion.

Preplaced Concrete

แปลว่า(Concrete Engineering) Concrete manufactured by placing clean, graded coarse aggregate in a form and later injecting a portland cement-sand grout under pressure, to fill the voids.

Reaction:

แปลว่า(english) A reaction is a force exerted by a support on an object: sometimes called support reaction. Using this definition, a reaction is an external force.

Ball Burnishing

แปลว่า(english) A method of obtaining a high luster on small parts by rotating them in a wooden-lined barrel with water, burnishing soap, and stainless steel shot.

Compression settling

แปลว่า(Environmental Engineering) Settling which occurs in the lower reaches of clarifiers where particle concentrations are highest. Particles can settle only by compressing the mass of particles below.

Water-Cement Ratio

แปลว่า(Concrete Engineering) The ratio of the amount of water, exclusive of that absorbed by the aggregates, to the amount of cement in a concrete mix. Typically expressed as percentage of water, by weight in pounds, to the total weight of portland cement, fly ash, and any other cementitious material, per cubic yard, exclusive of any aggregates.

Portland-Pozzolan Cement (ASTM C 595)

แปลว่า(Concrete Engineering) The product obtained by intimately intergrinding a mixture of portland-cement clinker and pozzolan, or an intimate and uniform blend of portland cement and fine pozzolan.

Bearing Load

แปลว่า(english) A compressive load supported by a member, usually a tube or collar, along a line where contact is made with a pin, rivet, axle, or shaft.