ผลการค้นหา

bearing between hub and axle shaft

แปลว่าแบริ่งระหว่างดุมครอบเรือนเพลากับเพลา

bearing between axle shaft and casing

แปลว่าแบริ่งระหว่างเพลากับเรือนหุ้มเพลา

Jacking Equipment

แปลว่า(Concrete Engineering) In prestress concrete, the device used to stress the tendons.

Jacking Force

แปลว่า(Concrete Engineering) The temporary force exerted by the jacking device which introduces tension into the tendons. Jacking Stress In prestress concrete, the maximum stress occurring in a tendon during stressing.

Shear modulus:

แปลว่า(english) The ratio of shear stress divided by the corresponding shear strain in a linear elastic material.

Babbitt

แปลว่า(english) An antifriction metal alloy used for bearing inserts;made of tin,antimony,lead and copper.

Bending Strength

แปลว่า(english) Upper limit of normal stress of a beam at which fracture or excessive plastic deformation occurs.

Yield strain:

แปลว่า(english) A material deformed beyond its yield strain, no longer exhibits linear elastic behavior. See yield stress.

Pressure:

แปลว่า(english) Pressure is a similar idea to stress, the force intensity at a point, except that pressure means something acting on the surface of an object rather than within the material of the object. When discussing the pressure within a fluid, the meaning is equivalent to stress.

Modulus of elasticity:

แปลว่า(english) The proportional constant between stress and strain for material with linear elastic behavior: calculated as stress divided by strain. Modulus of elasticity can be interpreted as the slope of the stress-strain graph. It is usually denoted as E, sometimes known as Young's Modulus Y, or E-Modulus.

Plane of Weakness

แปลว่า(Concrete Engineering) The plane along which a structure under stress will tend to fracture; may exist because of the nature of the structure and its loading, by accident, or by design.

Linear:

แปลว่า(english) A structure is said to behave linearly when its the deformation response is directly proportional to the loading (i.e. doubling the load doubles the displacement response). For a material, linear means that the stress is directly proportional to the strain.