ตัวกรองผลการค้นหา
high pressure cylinder
แปลว่ากระบอกสูบเครื่องยนต์ที่รับการอัดได้สูง
high-tension insulator
แปลว่าฉนวนไฟฟ้าแรงสูง
Brasses
แปลว่า(english) Copper base alloys in which zinc is the principal alloying element. Brass is harder and mechanically stronger than either of its alloying elements copper or zinc. It is formable and ductile; develops high tensile strength with cold-working and is not heat treatable.
high-tension circuit
แปลว่าวงจรแรงดันไฟฟ้าสูง
high-alumina cement
แปลว่าปูนซีเมนต์อลูมินาสูง
high tension testing transformer
แปลว่าหม้อแปลงไฟซึ่งออกแบบใช้สำหรับเป็นเครื่องวัดแรงไฟที่สูงถึง 10,000 โวลท์ เพื่อป้องกันอันตรายที่เกิดขึ้น
Accordion Reed Steel
แปลว่า(english) Hardened, tempered, polished and blued or yellow flat steel with dressed edges. Carbon content about 1.00. Material has to possess good flatness, uniform hardness and high elasticity.
high tension magneto
แปลว่าแมกนิโตซึ่งใช้ในการผลิตประกายไฟแรงเคลื่อนสูง เพื่อการจุดระเบิดเชื้อเพลิงของเครื่องยนต์
Blast Cleaning (blasting)
แปลว่า(english) A process for cleaning or finishing metal objects by use of an air jet or centrifugal wheel that propels abrasive particles (grit, sand, or shot) against the surfaces of the workpiece at high velocity.
Black Plate
แปลว่า(english) A light weight or a thin uncoated steel sheet or strip so called because of its dark oxide coloring prior to pickling. It is manufactured by two different processes. (1) Form sheet bar on single stand sheet mills or sheet mills in tandem. This method is now almost obsolete. (2) On modern, high speed continuous tandem cold reduction mills from coiled hot rolled pickled wide strip into ribbon wound coils to finished gage. Sizes range from 12 to 32 in width, and in thicknesses from 55 lbs. to 275 lbs. base box weight. It is used either as is for stampings, or may be enameled or painted or tin or terne coated.
high melting poit grease
แปลว่าจารบีชนิดที่มีจุดแห่งการหลอมละลายได้สูง หรือละลายมาก ใช้สำหรับอัดลูกปืนเครื่องปั๊มน้ำ
Blister Steel
แปลว่า(english) High-carbon steel produced by carburizing wrought iron. The bar, originally smooth, is covered with small blisters when removed from the cementation (carburizing) furnace.