ผลการค้นหา

primary winding

แปลว่าขดลวดแรงไฟสูง ซึ่งเป็นตัวต้นรับกระแสไฟเข้าไปก่อน secondary winding (ความหมายเดียวกับ primary coil)

Band Wareroom

แปลว่า(english) A storage area in Strip Steel used for storing hot bands (coil made from slab).

Bi-Coil

แปลว่า(english) Also BY-COIL. Tin Mill term. Customers buy "by coil" or "bi-coil" rather than cut sheets

Bending Angle

แปลว่า(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.

Work breakdown structure (WBS)

แปลว่า(Software Engineering) the set of work tasks required to build the software; defined as part of the process model

Buckles

แปลว่า(english) Appeaars like a series of waves and are created during rolling as a result of mechanical misalignment or cross-section irregularities in supply coil.

Tesla

แปลว่านักวิทยาศาสตร์ไฟฟาชาวอเมริกันผู้คิดค้นทำขดลวดเพิ่มความถี่ของไฟฟ้าสลับ เรียกว่า Tesla coil และหลอดไฟ Tesla tube (ค.ศ. 1852)

backed-up

แปลว่า(การพิมพ์) แผ่นกระดาษที่พิมพ์ทั้งสองหน้า backed - up erong = แสดงว่าพิมพ์ผิด

Baller Stick

แปลว่า(english) Octagon-shaped wooden stick approximately 5' long. This stick is used in the baller area, to change burr mashers, to start a coil with a large ID, etc.

Back-up Balance

แปลว่า(english) Cylinders that supply the force used to hold the back-up rolls up in place.

Zirconia

แปลว่า(english) ZrO2 an acid refractory up to 2500 B0C (4532 B0F) having good thermal shock resistance and low electrical resistively.

Z-Mill

แปลว่า(english) The full name for z-mill is Sendzimir mill. A Z-mill operates with a very small diameter work roll, normally about 2 inches, backed up by a number of rolls in a pyramid-shaped stack. This roll set up allows you to exert extremely high forces through the work roll and yet keep the work roll from extreme flexing. The take-up roll on the Z-Mill also exerts a tension on the coil as it comes through the mill. The combination of high pressure and tension makes the mill capable of rolling material thin and flat.