ผลการค้นหา

Work breakdown structure (WBS)

แปลว่า(Software Engineering) the set of work tasks required to build the software; defined as part of the process model

Back Draft

แปลว่า(english) Reverse taper which would prevent removal of a pattern from a mold or a core from a corebox.

Acid Process 1

แปลว่า(english) A process of making steel, either Bessemer, open-hearth or electric, in which the furnace is lined with a siliceous refractory and for which low phosphorus pig iron is required as this element is not removed.

Clarifier (sedimentation basin)

แปลว่า(Environmental Engineering) A tank in which quiescent settling occurs, allowing solid particles suspended in the water to agglomerate and settle to the bottom of the tank. The solids resulting from the settling being removed as a sludge.

Complexity

แปลว่า(Software Engineering) a quantitative measure of a program's complexity

Fermentation

แปลว่า(Environmental Engineering) Energy production without the benefit of oxygen as a terminal electron acceptor, i.e. oxidation in which the net effect is one organic compound oxidizing another. See respiration.

Deoxygenation

แปลว่า(Environmental Engineering) The consumption of oxygen by the different aquatic organisms as they oxidized materials in the aquatic environment.

Saponification

แปลว่า(Concrete Engineering) The deposit of a gray scum or gray dust on the inside surface of a subgrade wall or floor; as the result of moisture moving through the concrete and washing certain chemicals from the concrete mass.

Bench Lathe

แปลว่า(english) A small lathe mounted on a bench or table.

Bearing Load

แปลว่า(english) A compressive load supported by a member, usually a tube or collar, along a line where contact is made with a pin, rivet, axle, or shaft.

Autotrophs

แปลว่า(Environmental Engineering) A group of organisms capable of obtaining carbon for synthesis from inorganic carbon sources such as carbon dioxide and its dissolved species (the carbonates). This group includes plants and algae.

Bastard

แปลว่า(english) Threads,parts,tools and sizes that are not standard, such as, “Bastard Nuts”, “Bastard Plus”, “bastaard fittings and so forth. The term also refers to a standard coarse cut file.