ตัวกรองผลการค้นหา
Bending Angle
แปลว่า(english) A 'V-shaped' piece of angle iron attached to the rear of the coil car in the Strip Steel, which is used to help the operator put bends into the front end of a coil.
Metalimnion
แปลว่า(Environmental Engineering) The middle layer of a lake.
Billet container
แปลว่า(english) The part of the extrusion press into which the billet to be extruded is placed.
Bull Gear
แปลว่า(english) The large crank gear of a shaper.
Project control
แปลว่า(Software Engineering) the control of quality and change
Bend Radius
แปลว่า(english) The inside radius of a bent section,
Epilimnion
แปลว่า(Environmental Engineering) The top layer of a lake.
Right of Access to the Site
แปลว่าสิทธิในการเข้าพื้นที่ก่อสร้าง
Sufficiency of the Accepted Contract Amount
แปลว่าความเพียงพอของมูลค่างานตามสัญญาที่ตกลงกัน
Activation
แปลว่า(english) The changing of the passive surface of a metal to a chemically active state. Contrast with passivation.
Water-Cement Ratio
แปลว่า(Concrete Engineering) The ratio of the amount of water, exclusive of that absorbed by the aggregates, to the amount of cement in a concrete mix. Typically expressed as percentage of water, by weight in pounds, to the total weight of portland cement, fly ash, and any other cementitious material, per cubic yard, exclusive of any aggregates.
Degree of Freedom:
แปลว่า(english) A displacement quantity which defines the shape and location of an object. In the two dimensional plane, a rigid object has three degrees of freedom: two translations and one rotation. In three dimensional space, a rigid object has six degrees of freedom (three translations and three rotations).