ตัวกรองผลการค้นหา
Bull Gear
แปลว่า(english) The large crank gear of a shaper.
Mixed liquor volatile suspended solids (MLVSS)
แปลว่า(Environmental Engineering) The volatile suspended solids concentration in the activated sludge tank.
Photochemical pollutants
แปลว่า(Environmental Engineering) Chemicals which react photochemically (in the presence of sunlight) to destroy ozone in the stratosphere.
Trophic level
แปลว่า(Environmental Engineering) A level in the food chain. The first trophic level consists of the primary producers, autotrophs. The second trophic level is vegetarians which consume autotrophic organisms.
Cyclomatic complexity
แปลว่า(Software Engineering) a measure of the logical complexity of an algorithm, used in white-box testing
Nitrogenous oxygen demand (NOD)
แปลว่า(Environmental Engineering) The amount of oxygen required to oxidize any ammonia present in a water.
Stiffness:
แปลว่า(english) This is a general term which may be applied to materials or structures. When a force is applied to a structure, there is a displacement in the direction of the force; stiffness is the ratio of the force divided by the displacement. High stiffness means that a large force produces a small displacement. When discussing the stiffness of a material, the concept is the same, except that stress substitutes for force, and strain substitutes for displacement; see modulus of elasticity.
Thermocline
แปลว่า(Environmental Engineering) The depth at which an inflection point occurs in a lake temperature profile.
Software testing
แปลว่า(Software Engineering) a set of activities conducted with the intent of finding errors in software
Rod (tamping) (ASTM C24l)
แปลว่า(Concrete Engineering) A round, straight steel rod, 5/8' in diameter and approximately 24' in length, having the tamping end rounded into a hemispherical tip, the diameter of which is 5/8'.
Elastic Shortening
แปลว่า(Concrete Engineering) The shortening of a member in pre-stressed concrete which occurs on the application of forces induced by prestressing.
Blind Bole
แปลว่า(english) A hole made in a workpiece that does not pass through it.