ตัวกรองผลการค้นหา
cross cut saw
แปลว่าเลื่อยตัดขวางตามลายเนื้อไม้ วึ่งมีฟันเลื่อยเหมือนใบมีดคมของลำ
fret saw blade
แปลว่าใบเลื่อยฉลุ
key hole saw (campas saw, pad sew)
แปลว่าเลื่อยเจาะรูกุญแจ เป็นเลื่อยใบแคบปลายเรียวแหลม ฟันละเอียดสำหรับใช้เลื่อยทำรูกุญแจ หรือช่องขนาดเล็ก ๆ ฯลฯ
Band Saw Steel (Wood)
แปลว่า(english) A hardened tempered bright polished high carbon cold rolled spring steel strip produced especially for use in the manufacture of band saws for sawing wood, non ferrous metals, and plastics. Usually carries some nickel and with a Rockwell value of approximately C40/45.
Bandsaw
แปลว่า(english) A power saw, the blade of which is a continuous,narrow,steel band having teeth on one edge and passing over two large pulley wheels.
Saponification
แปลว่า(Concrete Engineering) The deposit of a gray scum or gray dust on the inside surface of a subgrade wall or floor; as the result of moisture moving through the concrete and washing certain chemicals from the concrete mass.
Agglomerating Processes
แปลว่า(english) "Fine particles of limestone (flux) and iron ore are difficult to handle and transport because of dusting and decomposition, so the powdery material usually is processed into larger pieces. The raw material's properties determine the technique that is used by mills. 1) SINTER Baked particles that stick together in roughly one-inch chunks. Normally used for iron ore dust collected from the blast furnaces. 2) PELLETS Iron ore or limestone particles are rolled into little balls in a balling drum and hardened by heat. 3) BRIQUETTES Small lumps are formed by pressing material together. Hot Iron Briquetting (HBI) is a concentrated iron ore substitute for scrap for use in electric furnaces.