ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(english) Work done primarily at a bench with hand tools. Occasionlly suplemented by small power-driven tools.
(english) A number of standard tests determined by American Foundrymen's Society to evaluate molding and core sands.
(Concrete Engineering) The increase of concrete temperature caused by heat of hydration and heat from other sources.
(english) Developing a smooth finish on a metal by tumbling or rubbing with a polished hand tool.
(english) By-product gas created by the iron making process which is used as fuel for the boilers.
(english) The ratio of shear stress divided by the corresponding shear strain in a linear elastic material.
(Concrete Engineering) The water in concrete which is irremovable by oven drying; chemically combined during cement hydration.
(Concrete Engineering) Area or portion of hardened concrete which is deficient in mortar and consisting primarily of coarse aggregate and open voids; caused by insufficient consolidation or separation during placement, or both; by leakage from form.
(english) A common standard method of measuring the hardness of materials. The smooth surface of the metal is subjected to indentation by a hardened steel ball under pressure. The diameter of the indentation, in the material surface, is then measured by a microscope and the hardness value is read from a chart or determined by a prescribed formula.
(การพิมพ์) แปดหน้ายก กระดาษขนาด 18. by 24. ซึ่งพับลงเป็นสองทบทำเป็น 4 ใบ เท่ากับ 8 หน้า
(english) Multiple shaving, accomplished by pushing a tool with stepped cutting edges along the piece, particularly through holes.
(Environmental Engineering) The gradual replacement of freshwater by saltwater in coastal areas where excessive pumping of groundwater occurs.