ผลการค้นหา

Refactoring

แปลว่า(Software Engineering) changing software in a way that improves its internal structure but does not change it external behavior; often conducted iteratively as design evolves into code.

gearbox

แปลว่าเกียร์รถ, เครื่องเปลี่ยนความเร็วของเครื่องยนต์ ที่เรียกกันทั่วๆ ไปว่า เกียร์ (ความหมายอย่างเดียวกับคำว่า change speed gear หรือ charge speed gear ซึ่งแปลว่า เครื่องถ่ายกำลังมาเป็นความเร็ว) กระปุกเฟืองเกียรร์)

Baller Stick

แปลว่า(english) Octagon-shaped wooden stick approximately 5' long. This stick is used in the baller area, to change burr mashers, to start a coil with a large ID, etc.

Shear strain:

แปลว่า(english) Strain measuring the intensity of racking in the material. Shear strain is measured as the change in angle of the corners of a small square of material.

Beam and Sling

แปลว่า(english) Tackle used in conjunction with a crane for turning over the cope or drag of a mold prior to assembly.

Concentrated force:

แปลว่า(english) A force considered to act along a single line in space. Concentrated forces are useful mathematical idealizations, but cannot be found in the real world, where all forces are either body forces acting over a volume or surface forces acting over an area.

Force:

แปลว่า(english) A directed interaction between two objects that tends to change the momentum of both.Since a force has both direction and magnitude, it can be expressed as a vector

Bed-In

แปลว่า(english) Method whereby drag may be rammed in the pit or flask without necessity of rolling over. Process used in production of heavy castings.

Distributed load:

แปลว่า(english) An external force which acts over a region of length, surface, or area: essentially any external force which is not a concentrated force.

Strength:

แปลว่า(english) A very general term that may be applied to a material or a structure. In a material, strength refers to a level of stress at which there is a significant change in the state of the material, e.g., yielding or rupture. In a structure, strength refers to a level of level of loading which produces a significant change in the state of the structure, e.g., inelastic deformations, buckling, or collapse.

Closure

แปลว่า(Environmental Engineering) The act of preparing a landfill for long term inactivity, including placement of a cover over the landfill to prevent infiltration of surface water.

Bandsaw

แปลว่า(english) A power saw, the blade of which is a continuous,narrow,steel band having teeth on one edge and passing over two large pulley wheels.