ตัวกรองผลการค้นหา
คลิกที่แต่ละคำเพื่อดูรายละเอียด
(เคมี) แก๊สที่เกิดขึ้นเองตามธรรมชาติ โดยเฉพาะในบริเวณที่เป็นแหล่งน้ำมัน จะมีแก๊สธรรมชาติอย่างมากมาย เป็นแก๊สที่นำมาเป็นเชื้อเพลิงได้
การเชื่อมโลหะด้วยกรรมวิธีอย่างเดียวกับใช้อาซิติลิน แต่ต่างกันที่เชื้อเพลิงคือตัวไฮโตรเจน
(Concrete Engineering) Exceptionally lightweight precast concrete with high thermal qualities and fire resistence. Suitable for cutting with ordinary hand tools. Mix design is composed of portland cement, sand or siliceous material, lime, gypsum, finely powdered aluminum, and water. Initial mix is a combination of portland cement, sand, lime and gypsum to produce a slurry. Finely powdered aluminum mixed into a paste is added prior to placement into large, rail-like forms. The finely powdered aluminum reacts with the alkaline components of the cement and lime to produce hydrogen gas, which increases the volume approximately five times producing a uniformly, dispersed cellular structure. Units are cut to required shape. Units are placed in an autoclave, an enclosed pressurized chamber, and steam cured at 3500 F. Approximately 80% of the ultimate volume consists of air voids.
น้ำมันเชื้อเพลิงที่ใช้กับเครื่องดีเซล หรือที่เรียกว่า น้ำมันโซล่า
เชื้อเพลิงที่เป็นแก๊ส
(english) A fabric or plastic device that is used with an o-ring or other gasket to prevent extrusion of the o-ring or gasket into an adjacent space or crevice
(Concrete Engineering) The ability of a material or product to reduce or eliminate gaseous transmissions through it's mass; measured as the rate of Water Vapor Transmission (WVT). Note: Not all materials that are waterproof are vaporproof; all materials that are vaporproof are inherently waterproof.
เชื้อเพลิงซึ่งเป็นแกส
(Environmental Engineering) The anoxic biological conversion of nitrate to nitrogen gas. It occurs naturally in surface waters low in oxygen, and it can be engineered in wastewater treatment systems.
ชานอ้อย เป็นสิ่งผลิตผลพลอยได้ใช้กันมากในการก่อสร้าง
ประเก็นทองแดง (ส่วนมากใช้กับท่อไอเสีย เพราะทนความร้อนได้สูง)
(english) Heat in an oven to a low controlled temperature to remove gases or to harden a binder.