ผลการค้นหา

Top Out* *Top Out *Top Out*
คำศัพท์ช่างภาษาอังกฤษ - ไทยคำศัพท์/สำนวน ทั้งหมดบทความ
ค้นเจอ 65 รายการ

คำศัพท์ช่างภาษาอังกฤษ - ไทยที่เกี่ยวข้องกับ "Top Out"

คลิกที่แต่ละคำเพื่อดูรายละเอียด

adjustable

ปรับได้, ตั้งได้, แต่งให้เหมาะสมได้ out of adjustable = หลวม, ปรับให้เข้าที่, ปรับตั้งไม่ได้

hacking knife (hacking - out tool)

มีดขูดสีเก่า หรือพุตตีเก่า ออกจากกรอบกระจก

Backing Sand

(english) The bulk of the sand in the flask. The sand compacted on top of the facing sand that covers the pattern.

Scheduling

(Software Engineering) the activity that lays out a timeline for work to be conducted on a project

Bright Annealing

(english) A process carried out usually in a controlled furnace atmosphere, so surface does not oxidize, remaining bright.

Blast Furnace 2

(english) A vertical shaft type smelting furnace in which an air blast is used, usually hot, for producing pih iron. The furnace is continuous in operation using iron ore, coke, and limestone as raw materials which are charged at the top while the molten iron and slag are collected at the bottom and are tapped out at intervals.

A Elevation

(English) The top level of the boiler firebox where four oil guns are located. The oil guns are used to produce steam and maintain pressure while the boiler is on oil fire.

BREATHER

(english) A device which permits air to move in and out of a container or component to maintain atmospheric pressure.

Ball Piston Pumps

(english) The Ball Piston Pump is a very simple pump design. It has a rotor which revolves around an internal stator. The rotor has twelve cylinders machined out of it, and each cylinder has a ball inside which can slide in and out of the cylinder.

Slump Cone

(Concrete Engineering) A metal mold in the form of a truncated cone with a top diameter of 4”, a bottom diameter of 8”, and a height of 12”, used to fabricate the specimen for a slump test.

Broaching

(english) Smoothing machined holes or outside surfaces of castings by drawing pushing on or more broaches (special cutting tools) through the roughed out hole.

Back-up Roll

(english) 1) Roll used as a support roll mainly for plater rolls. 2) Two rolls, one on top and one on bottom of the two work rolls which apply pressure and reduce the flexing of the work rolls.

 ศัพท์ช่างภาษาอังกฤษ – ไทย จัดกลุ่มตามตัวอักษร A-Z

ดูหมวดหมู่ทั้งหมด